Audix SCX25A

The SCX25A is a true condenser microphone with an elegant design and a patented capsule suspension system. Uniquely shock mounted within an intricate machined brass ring, the SCX25A capsule is completely isolated from the mic body and the electronics. By successfully minimizing acoustic reflections and diffractions, SCX25A delivers a pure, open-air sound unlike any other microphone.


Audix SCX25A Features :

• Cardioid pickup pattern
• Wide frequency range of 20Hz to 20kHz
• Max SPL: 135dB
• Innovative Design
• Isolated Capsule Suspension System
• Low Noise Electronics
• Extremely Small Footprint With A Brass Body - Only 4 Inches Long
• 1 Year warranty

Audix SCX25A Applications :

• Vocals, lead and backing
• Voice over
• Choir
• Ambient room mic
• Drum overheads
• Orchestra
• Bells, chimes, marimba, vibes
• Acoustic instruments (piano, sax, strings, guitar, flute)

Delivering a smooth uniform frequency response from 20Hz-20 kHz, the SCX25A will reproduce vocals and acoustic instruments with exceptional detail and realism.
The SCX25A is very consistent when responding to incoming off-axis signals, exhibiting excellent phase coherence and minimal proximity effect. By employing miniaturized low noise components, the preamp circuitry for the SCX-25A is housed within a brass microphone body which is merely 4 inches long.
The result is the smallest footprint of any large diaphragm microphone to date, allowing the SCX-25A more convenience and freedom when it comes to mic placement. And because of the internal capsule suspension mounting system, the need for costly shock mounts is eliminated and set-up time is greatlysimplified.

The SCX25A, which is manufactured to exacting standards and tight tolerances, features a precision machined brass body, innovative capsule suspension system, steel mesh grill, black e-coat finish, laser etched model and serial number, Switchcraft® XLR connector, and heavy duty nylon clip.

The SCX25A operates on phantom power of 48-52 Volts.

Optimum results will be achieved by using the SCX25A with a high quality mic preamplifier and premium quality microphone cable.

Audix SCX25A Specifications :

• Transducer Type: Condenser
• Frequency Response: 20Hz to 20kHz
• Polar Pattern: Cardioid
• Output Impedance: 200 ohms
• Sensitivity: 27 mV (ref 1k @ 1 Pascal)
• Equivalent Noise Level: 14 dB (A weighted)
• Signal to Noise Ratio: 80 dB (ref 1k @ 1 Pascal)
• Power Requirements: 48-52V phantom
• Maximum SPL: 135 dB
• Dynamic Range: 121 dB
• Cable/Connector: 3 pin gold plated male XLR connector
• Polarity: Positive voltage on pin 2 relative to pin 3of output XLR connector
• Housing: Brass
• Weight: 6 oz