Aviom AN-16/i-M

The AN-16/i-M is a 3U-high rack-mounted mic- and line-level input device with 16 high-quality microphone preamps and 24-bit A-to-D converters. Each channel contains a three-segment level meter, a continuously variable gain knob, a phase reverse switch, 48-volt phantom power, and a rumble filter with an 85Hz rolloff. In addition, each pair of channels can be Stereo Linked for stereo operation in a Pro16 Monitor Mixing System.

The rear panel of the AN-16/i-M contains a host of professional connectivity features. Each channel has a combo jack that can accept either XLR mic or 1/4-inch line-level (balanced or unbalanced) inputs. Sixteen passive mic Thru connectors create a built-in microphone splitter. Balanced insert points with separate 1/4-inch Send and Return jacks allow easy interfacing with external processing devices. The sixteen insert Sends can also be used as a set of post-gain direct audio outputs. The AN-16/i-M uses an internal power supply with a standard IEC power connector.

Two parallel A-Net outputs allow the AN-16/i-M to send A-Net data to multiple destinations, allowing for simultaneous patching to a monitor console and a front-of-house console. Both A-Net outputs feature heavy duty Neutrik EtherCon combo RJ45 connectors. The built-in A-Net Expansion jack allows two 16-channel A-Net streams to be combined onto a single cable (32x0 or 16x16), and the AN-16SBR System Bridge can be used to combine up to four 16-channel streams onto a single cable in a variety of bi-directional configurations.

As with all Pro16 Series products, Cat-5e cable runs of up to 500 feet (150 meters) are possible between devices.


Aviom AN-16/i-M 16-Channel Mic and Line Level Input Module Features :

• Sixteen high quality mic preamps, with 24-bit A/D converters
• XLR mic or 1/4-inch TRS balanced line-level inputs on combo jacks
• 48-volt phantom power on each channel
• Three-segment LED level meter for each channel
• Continuously variable gain control for each channel
• Phase reverse switch per channel
• Rumble filter switch (85Hz rolloff) on each channel
• Stereo Link switch per pair of channels
• Built-in passive splitter
• Balanced insert send and return jacks (1/4-inch TRS)
• Dual A-Net outputs
• A-Net Expansion jack for 32x0 and 16x16 channel systems

Options :   
AN-16SBR System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable.

Aviom AN-16/i-M 16-Channel Mic and Line Level Input Module Specifications :

    * Input: XLR, TRS; Combo Jack
    * Insert Send/ Return: Connector: TRS, Signal; Impedance Balanced, Nominal Level; 0 dBu; A-Net Output: one Category 5 (RJ45 connector); A-Net Expansion: one Category 5 (RJ45 connector)
    * Gain Range:
    * Mic: +6dB to +60dB, variable
    * Line: -15dB to +36dB, variable
    * Input Impedance: Mic: 2.4 ohms, Line (TRS): 33k ohms, Insert Return: 39k ohms
    * Low Cut Filter: -3dB @85Hz, -18dB per octave
    * Phantom Power: +48 volts, per channel
    * A/D Converters: 24 bit
    * Digital Outputs: A-Net: 2 (Main and Aux), A-Net Expansion: 1
    * Power Supply: Internal, universal switching type; standard IEC cable provided
    * Voltage: 100-240VAC, 50-60Hz, 60W


Dimensions : 19" wide x 9.25" deep x 5.25" high (3U)
Weight : 12 lbs

Options :   
AN-16SBR System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable.