Blue Sky SUB 15 Universal Subwoofer
Active Studio Subwoofer with Sealed Box Design and Built-In 2.1 Bass Management System
|
Precision Studio Universal Monitoring Subwoofer - for larger rooms. Accurate and Powerful Subwoofer - 1000 Watts RMS with Built-In Bass Management and Room Response of 20 Hz to 200 Hz !
|
The THX® pm3 Approved, SUB 15 Universal, is a sealed box subwoofer, designed around a 15” forward-firing driver with a massive cast aluminum frame, dual 2.5” voice coils - which has almost 2.36” of excursion (peak to peak) and features an enormous 20+ Lbs. motor structure - total driver weight 36 Lbs.
One of the SUB 15 Universal’s unique features is a switchable low frequency response characteristic, of either 30Hz to 200Hz +/-3dB or, in “extended LF mode”, 20Hz to 200Hz +/-3dB (anechoic). The extended mode is ideal for large rooms that don’t exhibit the room gain phenomenon of smaller sealed spaces. In addition, the SUB 15 Universal also has built-in 2.1 bass management electronics with both a 4th order 80Hz Linkwitz-Riley low-pass filter and a 2nd order 80Hz high-pass filter that is compatible with the SAT 12’s bass-managed input and is also compatible with the I/ON, SAT 6.5 and SAT 5.
The SUB 15 Universal is also the second subwoofer from Blue Sky which allows you to add true low frequency extension to your existing nearfield and mid-field monitors. To accomplish this, the SUB 15 Universal includes dual independently tunable, state variable, high pass and low pass filters (50hz to 160Hz) with 4th order slopes.
Blue Sky SUB 15 Universal Subwoofer Features :
o Bass Extension Add true bass down to below 20Hz (typical in-room response down to 20Hz)
o Compatible Use with any nearfield or mid-field monitor, an ideal match for the Blue Sky SAT 12 and also compatible with the SAT 6.5 / SAT 6.5 MK II and SAT 5 / SAT 5 MK II. Additionally the SUB 15 is also fully compatible with any THX pm3 approved nearfield monitor.
o Adjustable Easy tune crossover from 50Hz to 160Hz to match your monitors. Additionally, the low frequency response characteristic can be changed between -3dB @ 30Hz down to -3dB @ 20Hz. This allows you to adapt the SUB 15 Universal to the acoustic conditions of your room.
o Sealed Box Design No port = no port noise = better transient response = greater SLAM!
o Easy Setup Straight forward with excellent customer support, if needed.
Blue Sky SUB 15 Universal Subwoofer Specifications :
Active Subwoofer Enclosure :
.75" MDF with 1" front / rear baffle and internal bracing Isolation feet are included Dimensions: 20.75” H x 18” W x 20.63” D (inc / heatsink and grill) Weight: 125 lbs. / 56.69 kg
15" Hemispherical Woofer :
15-inch high excursion (2.36" peak to peak) woofer with a vented 20+ Lbs. motor (total driver weight = 36 Lbs.) Cast aluminum frame Dual 2.5" high temperature voice coils Dual progressive spiders Mica filled polypropylene cone w/ Santropene surround Fully video shielded
Amplifier :
Class-D 1000-Watts RMS into 4-Ohm .1% THD + noise at rated power @ 1kHz XLR balanced inputs / outputs Adjustable gain control Voltage Sensitivity 100mv = 90dB SPL @ 1 meter Switchable low frequency response characteristic: Frequency Resp. 30Hz mode +/-3dB 30Hz to 200Hz Frequency Resp. 20Hz mode +/-3dB 20Hz to 200Hz Low Frequency Cutoff (20Hz mode) -3dB @ 20Hz
Bass Management :
Input impedance 10K balanced Common mode rejection 40dB typical @ 60Hz Maximum Input Level +24dBu balanced Output Impedance 200 Ohms balanced Nominal gain 0dB Direct In low pass filter : None
Switchable Filter Settings Blue Sky Mode :
High Pass Filter 80Hz 2nd order Low Pass Filter 80Hz 4th Order
Universal Mode :
Dual independently tunable state variable high pass and low pass filters Frequency Range 50Hz to 160Hz Filter Slope 4th Order
|
![]() |
More Images (click to select)
Roll over the image on the left for a closeup view.
|
|
|
|