Blue Sky I/ON 6.5" Passive Studio In Wall Monitor

Blue Sky’s I/ON Passive Studio Monitor is more than the typical in-wall or on-wall speaker. The I/ON passive studio monitor includes many unique features and benefits, which allow it to far exceed what has come to be expected from passive studio monitors and in-wall or on-wall speakers.

The end result is an on-wall / in-wall passive studio monitor that integrates seamlessly into to your studio, home cinema, boardroom, or other critical listening environment and provides the type of performance our customers have come to expect from Blue Sky.


Blue Sky I/ON 6.5in Passive Studio Monitor Features :

          o Studio grade performance
            I/ON is an evolution of Blue Sky’s critically acclaimed SAT 6.5 MK II active studio monitor, and is designed to integrate perfectly with Blue Sky’s SUB 12 and SUB 15 Universal.

          o Correct 80 Hz roll off
            For proper integration with the Blue Sky Subwoofer line, and most other Subwoofers and bass management systems.

          o Fully sealed box design
            For easy installation in a wall, or on a wall, without needing to rely on the inner wall as an enclosure.
            This provides the correct acoustic volume every time and eliminates the need for an accessory box to seal off the internal wall.

          o Versatile
            The same product mounts either in, or on a wall. It can also easily be mounted vertically, horizontally, or upside down.

          o Low diffraction cloth grille
            Greatly minimizes the acoustic impact of the grill cloth and grill frame on the performance of the I/ON Passive Studio Monitor.

          o Recommended Amplifier Power : 100 to 200 Watts



Note:
Like all Blue Sky SATs, the I/ON Passive Studio Monitor is designed to perform at its best when matched with a Blue Sky subwoofer such as the SUB 12, SUB 212 or SUB 15 Universal.

Blue Sky I/ON 6.5in Passive Studio Monitor Specifications :

General
Frequency Response:  80 Hz to 20kHz +/- 3 dB
Crossover:           2.0 kHz 4th order
Sensitivity:         85 dB SPL (2.82V RMS)
Impedance:           6 Ohms nominal / 5.5 Ohms minimum
Recommended Amplifier Power: 100 to 200 Watts
Sealed Enclosure: Solid MDF with 1.5” front and 5/8" rear baffle
Weight: 21 pounds


Tweeter
Dual concentric diaphragm with integral wave-guide
High-power ferrite motor structure
Fully video shielded

Woofer
6.5” high excursion woofer with vented motor
Cast aluminum frame
1.5” Aluminum voice coil
Copper shorting ring for lower distortion
Ultra low power compression design
Mica filled polypropylene cone w/ Rubber surround
Fully video shielded

Mounting
OmniMount Inserts: Four 1/4” x 20 inserts, located on the back of the cabinet, for attachment of OmniMount type 60 brackets (www.omnimountpro.com) or Powerdrive type 100 brackets (www.mypowerdrive.com).