Blue Sky SUB 8 Universal Subwoofer
Active Studio Subwoofer with Sealed Box Design and Built-In 2.1 Bass Management System
|
Compact, Accurate, and Powerful Subwoofer - 100 Watts RMS with Built-In Bass Management and Room Response of 20 Hz to 200 Hz !
|
Blue Sky International is the industry leader in providing professionals true full-range monitoring systems. The Blue Sky | SUB 8 Universal is the first product from Blue Sky which allows you to add this type of true low frequency extension to your existing nearfield monitors.
In addition the SUB 8 Universal, combined with Blue Sky’s SAT 5 or SAT 5 MK II, forms the highly acclaimed and award winning ProDesk™ Monitoring System.
Blue Sky SUB 8 Universal Active Subwoofer Features :
o Bass Extension
Add true bass down to 30Hz (20Hz in-room performance)
o Compatible
Use with any nearfield monitor and an ideal match for the Blue Sky SAT 5 / SAT 5 MK II
o Adjustable
Easy tune crossover from 50Hz to 160Hz to match your monitors
o Sealed Box Design
No port = no port noise = better transient response = greater SLAM!
o Easy Setup
Straight forward with excellent customer support, if needed.
Blue Sky SUB 8 Universal Active Subwoofer Specifications :
Enclosure :
.75” MDF with 1” front and rear baffle
Isolation feet included
Dimensions 13” H x 16” W x 13.37” D (15.76” with heatsink and grille)
Weight 48.5lbs / 22kg
8” Hemispherical Woofer :
8-inch high excursion woofer
Vented motor structure
Cast aluminum frame
2.0 “ voice coil
Aluminum alloy cone
Electrical Specification :
Input Voltage 115/230 VAC 50/60Hz switchable
Wattage 200 Watts
Fuse 115VAC 2A - 250 V 5x20mm (Time Delay or Slo-Blo)
230VAC 1.25A - 250 V 5x20mm (Time Delay or Slo-Blo)
Amplifier :
Discrete symmetrical bipolar design
100 Watts RMS into 4-Ohm
.01% THD + noise at rated power @ 100 Hz
XLR balanced input
Adjustable gain control
Voltage Sensitivity 100mv=90dB SPL@1m
Frequency Response (SUB IN - anechoic) 35 to 200Hz
Typical in room response (SUB IN ) 20 to 200Hz (3000 cubic feet)
Bass-Management :
Input impedance 20K balanced
Common mode rejection 40dB typical @ 60Hz
Maximum Input Level +24dBu balanced
Output Impedance 200 Ohms balanced
Nominal gain 0dB
SUB IN low pass filter None
Switchable Filter Settings :
SAT 5 Mode:
High Pass Filter None (uses filter in SAT 5)
Low Pass Filter 80Hz 4th Order
Universal Mode:
Dual independently tunable state variable high pass and low pass filters
Frequency Range 50Hz to 160Hz
Filter Slope 4th Order
|
![]() |
More Images (click to select)
Roll over the image on the left for a closeup view.
|
|
|
|
