Bryston 10B LR Pro Balanced Crossover (Balanced)

Bryston's Model 10B LR Electronic Crossover combines ideal signal-handling with an enormously flexible control function. Simple, direct front-panel switches allow any crossover curve to be set instantly, and the signal purity is always maintained. The Model 10B features independently selectable crossover points for high-pass and low-pass, in case the speaker installation requires slightly overlapped, (or slightly staggered), response curves for the drivers. You can also independently select crossover slope, from 6, 12, or 18dB/Oct., where one driver requires faster cutoff than another in the same system. A fixed frequency plug in Linkwitz-Riley alignment with steep rolloff curves of 24 dB/Oct. is included.

The crossover may be used in any of three internal connections: 2-way stereo, 3-way mono, and a special configuration, 2-way stereo with summed low pass out to allow the use of one sub-woofer. The 10B is available in two stock versions, a 10B sub incorporating frequencies more suitable to sub-woofer applications and a JOB standard which is more applicable to speakers requiring frequency control in the midband and tweeter areas.

All crossover selections are extremely accurate and repeatable, being implemented with 1% selected metal-film resistors and polystyrene capacitors. All switches are heavily gold-plated, for lifetime protection from corrosion. The level controls are precise 1 dB increments, also derived from gold-plated switches and 1% metal-film resistors. Most important, however, is that the Bryston 10B Crossover uses NO integrated circuits in the signal path. All internal buffer and amplification stages are Bryston's exceedingly linear and superbly quiet discrete op-amp circuitry. This means the signal is always maintained as "Audiophile Quality", with stability and freedom from noise and distortion unapproached in other crossovers.

From the point of view of adaptability, flexibility and signal integrity, the Bryston 10B Electronic Crossover is the ideal choice for the widest range of multi-way speaker installations



Bryston 10B LR Pro Balanced Crossover Features :

    * Mute switch
    * Low pass frequency selector
    * 12 selectable crossover points.
    * Low pass slope selector
    * 3 selectable slopes
    * High pass level control
    * High pass slope selector
    * 3 selectable slopes
    * High pass frequency selector
    * Input RCA or XLR
    * 24 dB Linkwitz-Riley version with plug in frequency points



Bryston 10B LR Pro Balanced Crossover (Sub) Specifications :

    * 24 dB Linkwitz-Riley version with plug in frequency points
10B PRO Standard Selectable frequencies :
  70 Hz. 100 Hz. 140 Hz.
  200 Hz. 300 Hz. 450 Hz, 700 Hz, 1 kHz,
  1.4 kHz, 2kHz. 3 kHz. 4.5 kHz

Slope : 6/12/18 dB per Oct
S/N ratio : -90dB
Distortion : 0.005%
Normal input level     1 volt
Input impedance :
  20k ohms, unbalanced
  - k ohms, balanced
Output Impedance : 100 ohms

Features :
    * Balanced XLR Inputs
       Stereo 2-way
       Monaural 3-way
       Stereo 2-way summed low pass
       Balanced or unbalanced
    * Independent high and low pass frequency selection
    * ±5dB of gain on high pass section
    * Internal adjustments for up to ±10dB

Dimensions :    
17 x 1.75 x 10 inches
48.25 x 4.44 x 25.4 cm

Weight : 12 lbs, 5.5 kg