Bryston 6B SST2 Pro Three Channel Amplifier

Triple Power...
The Bryston 6B SST2 provides three channels of powerful amplification in a single chassis. Consisting of three totally independent amplifier modules, each with its own power transformer and power supply, each audio channel will supply effortless power even to the world’s most demanding loudspeakers. The 6B SST2 is a convenient solution for home theater left-center-right amplification and is also a great way of tri-amplifying 3-way loudspeakers.



Modular design and separate power supplies for each channel ensure cross-talk is essentially nonexistent, and provide precise and focused soundstaging. Components mount directly into glass-epoxy circuit boards, eliminating variations in signal travel and wire interaction. Reviewers agree: sound quality is improved to a stunning degree, realizing a higher, and far more consistent standard of musical accuracy across a line of amplifiers than ever before possible.

Model advancements in the SST2 Series include:

    * New power supply transformer design
    * New push on/off power switch
    * New chassis design
    * New Soft-Start Circuit
    * New Balanced input stage
    * New Power Supply board
    * Bridging mode performance improvement
    * Reduced point to point wiring
    * Reduced circuit board count
    * Redesinged output chokes


Bryston 6B SST2 Pro Three Channel Amplifier Features :

    * New cosmetics
    * New Push on/off power switch
    * 300 watts per channel 8 ohms,
      500 watts 4 ohms
    * New SST 2 output devices
    * Increased power supply capacitance
      - 30,000 MFD per channel
    * Selectable Balanced or Unbalanced inputs
    * Lower noise and distortion
    * Two New Independent ultra-low-noise power transformers
    * New computer modeled heat-sink design
    * Quick connect remote 12 volt trigger
    * Selectable gain - 1 Volt or 2 Volt
    * Available in Silver or black finish with 19 or 17 inch faceplate
    * 20 Year Warranty



Bryston 6B SST2 Pro Three Channel Amplifier Specifications :

Power Output :
  300 watts per channel 8 ohms
  500 watts per channel 4 ohms


Distortion
  <0.007% from 20Hz to 20kHz at 300 watts, IM or THD

Noise Measured with input shortened - 20Hz to 20kHz
  >110dB below rated output 29dB gain (-75dBu)
  >113dB below rated output 23dB gain (-78dBu)

Slew Rate : Greater than 60 volts per microsecond
Power bandwidth : <1 Hz to over 100 kHz
Damping factor : Over 500 at 20Hz. ref. 8 ohms
Warranty : 20 years parts labor, shipping one way

Dimensions :
19" Version :
 48.25 x 13.33 x 39.4 cm - 19" x 7" x 19"
 19 x 7 x 20.5 with handles (mounting depth 18 3/8")

Weight : 80 lbs, 36 kg

Finish : Black or Silver