Earthworks SR30
Small Diaphragm Cardioid Studio Condenser Microphone with 30Hz to 30kHz Frequency Response
A cardioid condenser with an extremely flat and natural sound, the SR30 has become a favorite among concert tapers because of its rare combination of uncolored (and very fast) response and directionality (which reduces ambient sound). Also quite awesome on piano, drums, and acoustic instruments.
The Earthworks SR30 (same as SR77) is a remarkable cardioid that maintains most of the characteristics of our omni microphones. With high frequency response to 30kHz it will capture incredible detail in music.
At 6 inches away from the source it sounds as onmi-like as a cardioid can. The off-axis rejection is substantial yet uncolored. Its impulse response is very fast and smooth and the sound stays the same across the entire front hemisphere of pickup.
In the studio or on the stage, the SR30 is an ideal choice for a variety of acoustic instruments including sax, flute, trumpet, guitar, piano and drums. It is superior for choir because it doesn't spotlight; rather it picks up an entire section or area with no hot spots. The SR30 is popular among concert tapers because of its open uncolored sound and among jazz enthusiasts for its ability to capture explosive performances while retaining the subtle nuances of artist.
If you are looking for a directional microphone with full, open, detailed sound, your search has ended! Once you use the Earthworks SR30 you will wonder how you ever got along without it.
Earthworks SR30 Features :
* Cardioid Pickup Pattern * Superb Off-Axis Rejection * Even Frequency Response * Very Low Handling Noise
If you prefer transparency over coloration, a matched pair of SR30s is a 'must have'. Listen! You can hear all of the sound with the SR30. It sounds like you are there. This is the microphone of your dreams!
Earthworks SR30 Specifications :
* Transducer: Condenser * Polar pattern: Cardioid * Frequency Response: 30Hz to 30kHz * Sensitivity: 10mV/Pa (-40dBV/Pa) * Power requirements: 48V Phantom, 10mA * Peak acoustic input: 145dB SPL * Output: XLR (pin 2+) * Minimum output load: 600 ohm between pins 2 & 3 * Noise: 22dB SPL equivalent (A weighted) * Dimensions: 8.4"L x 0.86"D * Weight: 7.94 oz.
|
![]() |
More Images (click to select)
Roll over the image on the left for a closeup view.
|
|
|
|