Eventide DSP7000

Over 500 factory presets are included, taking full advantage of the superior processing power of the DSP7000, for the lushest reverbs and the most accurate, high quality pitch change programs ever. This high performance stereo processor features 24 bit conversion at 96kHz for flawless audio performance. The DSP7000 provides both analog and digital I/O with separate gain controls and metering for each domain. It offers the user extensive programmability and remote control capability. Over 150 user presets can be stored internally, and hundreds more can be stored on removable PCMCIA cards. Control functions on the DSP7000 are similar to the DSP4000, but enhancements make it even easier and more intuitive to use. The new Eventide DSP7000 accommodates presets and preset library cards developed for the DSP4000 series Ultra-Harmonizer units. Eventide's PC-based Vsigfile graphic editor can be used to create new effects for the DSP7000, and factory software upgrades can be downloaded to the unit from an internet-connected PC. The DSP7000 can be used with Eventide's new EVE/NET™ remote control unit, a price/performance breakthrough in full function signal processor remote controls. With EVE/NET, up to four stereo DSP7000 and multichannel Eventide Orville™ effects processors can be controlled in any combination from one or two remote locations. •Sample Rates 88.2, 48, 44.1, External KHz • Digital Inputs/Outputs 2 AES/EBU or SPDIF at 44.1 to 96KHz • ANALOG INPUTS 24 bit conversion. Any combination of 2 XLR (20kohms bridging) or 2 mono jacks (150kohms) • Impedance >20kOhm, Bridging • Full Scale Input Level 26dBu • Dynamic Range >105dB •Signal to Noise Ratio >105dB A-weighted •THD+N <.0025%@ 1kHz, -3dBFS • Crosstalk <-100dB @ 20Hz to 20 kHz, -3dBFS • Frequency Response: +0/-0.1dB @ sample rate:44.1KHz: 20Hz-20kHz, 48kHz: 20Hz-22kHz 88.2kHz: 20Hz-41kHz, 96kHz: 20Hz-44kHz Frequency Response: +0/-3.0dB @ sample rate: 44.1KHz: 5Hz-21kHz, 48kHz: 5Hz-23kHz 88.2kHz: 5Hz-42kHz, 96kHz: 5Hz-46kHz • ANALOG OUTPUTS XLR balanced • Impedance <50Ohm • Full Scale Output Level 26dBu • Dynamic Range >105dB • Signal to Noise Ratio >105dB A-weighted • THD+N <.0025%@ 1kHz, -3dBFS • Crosstalk <-100dB @ 20Hz to 20 kHz, -1dBFS • Frequency Response: +0/-0.1dB @ sample rate: 44.1KHz: 10Hz-20kHz, 48kHz: 10Hz-22kHz 88.2kHz: 10Hz-41kHz, 96kHz: 10Hz-4 4kHz • Frequency Response: +0-3.0dB @ sample rate: 44.1KHz: 5Hz-21kHz, 48kHz: 5Hz-23kHz 88.2kHz: 5Hz-42kHz, 96kHz: 5Hz-46kHz • Bypass Relay AES and AUDIO signals bypassed at power down • Remote Control Inputs Up to 2 foot pedals (or 5V control inputs) or 6 footswitches or combination • Remote Control Outputs 2 isolated relay closures, rated 1A at 30VDC • MIDI Connections 5 pin DIN Output and Thru 7 pin DIN Input with Output capability • Memory Card Interface 68 pin PCMCIA 2.0/JEIDA 4.0 Supports type 1 SRAM cards up to 4MB for data storage • Factory Preset Capabilities (at 48K sampling) Pitch Shifting: up to 11 voices Compressor/Limiter: up to 4 instances Equalization: up to 128 bands parametric single input, 64 bands at 2 channles • Sampling with time compression/expansion (48K) Up to 174 seconds mono (DSP 7500 only) • Digital Delay Up to 87 seconds mono IN ADDITION to any installed sampler