Eventide DSP7500

The "500" models offer all the standard Ultra-Harmonizer processor features, and then some, and are priced to be exceptional values. The new DSP7500 Stereo Ultra-Harmonizer Effects Processor upholds that tradition beautifully. It's a DSP7000 to-the-max, featuring several hundred additional presets especially useful in post-production and broadcast applications, plus a 174 second (mono), 87 second (stereo) sampler with special presets which make it one of the most versatile samplers you've ever used. From superb time compression and expansion to auto-replacement of snare and kick drum tracks, you'll never run out of ways to use the capabilities of the DSP7500 processor. • ANALOG INPUTS: 24 bit conversion. Any combination of 2 XLR (20kohms bridging) or 2 mono jacks (150kohms) • Impedance: >20kOhm, Bridging • Full Scale Input Level: 26dBu • Dynamic Range: >105dB • Signal to Noise Ratio: >105dB A-weighted • THD+N: <.0025%@ 1kHz, -3dBFS • Crosstalk: <-100dB @ 20Hz to 20 kHz, -3dBFS • Frequency Response: +0/-0.1dB @ sample rate: 44.1KHz: 20Hz-20kHz, 48kHz: 20Hz-22kHz 88.2kHz: 20Hz-41kHz, 96kHz: 20Hz-44kHz • Frequency Response: +0/-3.0dB @ sample rate: 44.1KHz: 5Hz-21kHz, 48kHz: 5Hz-23kHz 88.2kHz: 5Hz-42kHz, 96kHz: 5Hz-46kHz • ANALOG OUTPUTS: XLR balanced • Impedance: <50Ohm • Full Scale Output Level: 26dBu • Dynamic Range: >105dB • Signal to Noise Ratio: >105dB A-weighted • THD+N: <.0025%@ 1kHz, -3dBFS • Crosstalk: <-100dB @ 20Hz to 20 kHz, -1dBFS • Frequency Response: +0/-0.1dB @ sample rate: 44.1KHz: 10Hz-20kHz, 48kHz: 10Hz-22kHz 88.2kHz: 10Hz-41kHz, 96kHz: 10Hz-4 4kHz • Frequency Response: +0-3.0dB @ sample rate: 44.1KHz: 5Hz-21kHz, 48kHz: 5Hz-23kHz 88.2kHz: 5Hz-42kHz, 96kHz: 5Hz-46kHz • Bypass Relay: AES and AUDIO signals bypassed at power down • Remote Control Inputs: Up to 2 foot pedals (or 5V control inputs) or 6 footswitches or combination • Remote Control Outputs: 2 isolated relay closures, rated 1A at 30VDC • MIDI Connections: 5 pin DIN Output and Thru 7 pin DIN Input with Output capability • Memory Card Interface: 68 pin PCMCIA 2.0/JEIDA 4.0 Supports type 1 SRAM cards up to 4MB for data storage • Factory Preset Capabilities (at 48K sampling): Pitch Shifting: up to 11 voices Compressor/Limiter: up to 4 instances Equalization: up to 128 bands parametric single input, 64 bands at 2 channels • Sampling with time compression/expansion (48K): Up to 174 seconds mono (DSP 7500 only) • Digital Delay: Up to 87 seconds mono IN ADDITION to any installed sampler • Power: 100 watts, 100-130V, 220-240V, 50-60Hz • Size: Inches: 3.5H x 19W x 12.5D CM: 8.9H x 48.3W x 31.7D