Furman P-1800 AR

Not only is the P-1800 AR a high-quality voltage regulator, but it's also a full featured power conditioner; providing your precious gear with Furman's best-of-the-best filtering and purifying protection technologies.
The P-1800 AR kicks out a stable 120 volts of AC power while accepting a wide range of AC voltages. On the power conditioning side, you'll have the proven Furman Linear Filtering Technology, Series Multi-Stage Protection, and Extreme Voltage Shutdown protecting your gear.


The Furman P-1800 AR delivers a stable 120VAC power to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or overvoltages - all of which can cause sensitive electronic equipment to malfunction or sustain damage. The P-1800 AR accepts input voltages over a wide AC voltage range and transforms it to a constant output of 120V, &plusmn5V. Voltages beyond that range may also be converted to usable levels, depending on the range variance.

Additionally, the P-1800 AR is a full-featured power conditioner that filters and purifies AC power, reducing line noise and ensuring optimum performance. Not only will your equipment perform better with Furman's Linear Filtering Technology (LiFT), but it will also be fully protected by our exclusive Series Multi-Stage Protection (SMP), and Extreme Voltage Shutdown (EVS). This circuitry provides the highest level of power protection available.


Furman P-1800 AR Voltage Regulator and Power Conditioner Features :

    * Surge Protection
      Furman's exclusive SMP technology provides the highest level of surge & spike protection available

    * Noise Filtration
      LiFT offers AC power filtering to ensure clean power for unequaled audio & video clarity

    * Voltage Protection
      Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions

    * Diagnostic Lights
      LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised

    * True RMS Voltage Regulation
      True RMS Voltage Regulation delivers a stable 120V power to protect equipment from problems caused by AC line voltage irregularities

    * USB Charger
      Front panel USB convenience outlets allows you to charge most media devices or power a USB lamp

    * Voltmeter / Ammeter
      Large digital voltmeter / ammeter, with discrete dimmer button, displays line votlage and true RMS current draw

    * Isolated Banks
      Isolated outlet banks minimize inter-component interference and noise contamination

    * Wall Wart Spacing
      Three widely spaced outlets accommodate bulky AC power transformers

    * 15A Rating
      15A rating featuring a high in-rush magnetic circuit breaker for added protection

    * Nine Total Outlets
      Nine total outlets (8 rear panel outlets and one front panel convenience outlet)

    * BNC Lamp Connector
      Rear panel BNC connector powers any standard gooseneck lamp for rear rack illumination



Furman P-1800 AR Voltage Regulator and Power Conditioner Specifications :

    * Maximum Current: 15 amps @ 124 Volts
    * Line Cord: Captive 3/14 AWG, 10 ft. black cord with NEMA 15 plug
    * BNC Socket w/Switch: 12VAC 500MA maxx (lamp not included)
    * Operating Voltage: 90 to 139 VAC
    * Over-Voltage Shutdown: 140 VAC Nominal
    * Approximate Input Voltage Capture Range: 7 to 137 VAC
    * Spike Protection Mode: Line to neutral, zero ground leakage
    * Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps
    * Response Time: 1 nanosecond
    * Maximum Surge Current: 6,500 Amps
    * Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
    * Power Consumption: 5 watts
    * Dimensions : 19 x 12 x 1.75"
    * Weight :  15 lbs

Furman P-1800 AR Specifications :

Maximum Current:    15 amps @ 124 Volts
Line Cord:    Captive 3/14 AWG, 10 ft. black cord with NEMA 15 plug
BNC Socket w/Switch:    12VAC 500MA maxx (lamp not included)
Operating Voltage:    90 to 139 VAC
Over-Voltage Shutdown:    140 VAC Nominal
Approximate Input Voltage Capture Range:    97 to 137 VAC
Spike Protection Mode:    Line to neutral, zero ground leakage
Spike Clamping Voltage:    188 VAC peak @ 3,000 Amps
Response Time:    1 nanosecond
Maximum Surge Current:    6,500 Amps
Noise Attenuation:    10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
Power Consumption:    5 watts

Dimensions:    19” W x 12” D x 1.75” H
Weight:    15 lbs.