Furman P-1800 PF R
Advanced Level Power Conditioner / Surge Protection with Power Factor Technology
|
Your amp needs a lot of power to sound its best. If you're plugging into the wall, there's a good chance your amp is not going to get the current it needs when pushed. Furman's exclusive Power Factor Technology provides a 45A peak current reservoir to give your amp the headroom it needs to operate at maximum efficiency. No matter what venue or club, or how close or far away from the power panel, Furman's Power Factor Technology keeps your instrument amplifier's tone consistent and sounding it's best.
|
Engineered specifically for use with instrument amplifiers and other high-current equipment, the Furman P-1800 PF offers a stable, protected and filtered low impedance powered supply for maximum performance of connected electronics. Furman's exclusive Power Factor provides a 45A peak current
reservoir to minimize the detrimental effects of line impedance on
high-current gear such as amplifiers and powered monitors. Clear Tone
Technology provides additional line noise filtration tuned for
instrument amplifiers for clean and consistent tone. Plus, equipment
benefits from professional-level protection thanks to Furman's
exclusive SMP and EVS technologies.
Power Factor Technology
Your amp needs a lot of
power to sound its best. If you’re plugging into the wall, there’s a
good chance your amp is not going to get the current it needs when
pushed. Furman’s exclusive Power Factor Technology provides a 45A peak
current reservoir to give your amp the headroom it needs to operate at
maximum efficiency. No matter what venue or club, or how close or far
away from the power panel, Furman’s Power Factor Technology keeps your
instrument amplifier’s tone consistent and sounding it’s best.
Clear Tone Technology
Clear Tone Technology
works in unison with Power Factor Technology and Linear Filtering
Technology to add an additional layer of AC noise filtration
specifically engineered for instrument amplifiers. Clear Tone
Technology provides tuned circuits that unveil instrument tone,
harmonics, and clarity, resulting in a fuller sound and improved
dynamic response.
Furman P-1800 PF Specifications :
Maximum Current: 15 amps @ 124 Volts
Line Cord: Removable black cord with NEMA 15 plug
Operating Voltage: 90 to 139 VAC
Over-Voltage Shutdown: 140 VAC Nominal
Spike Protection Mode: Line to neutral, zero ground leakage
Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps
Response Time: 1 nanosecond
Maximum Surge Current: 6,500 Amps
Noise Attenuation: 30 dB @ 2 kHz, 40 dB @ 10 kHz, 50 dB @ 20 kHz, 70 dB @ 100 kHz
Power Consumption: 8 watts
Reactive Power: 460 VA
Dimensions: 8.125” W x 12.5” D x 5.25” H
Weight: 11 lbs.
|
![]() |
More Images (click to select)
Roll over the image on the left for a closeup view.
|
|
|
|
