JBL LSR6332

Passive Three-Way Mid Range Studio Reference Monitors by JBL!

The JBL LSR6332 is a passive mid-field studio monitor that incorporates a 12" Neodymium Differential Drive NDD™ dual coil woofer, 5" Kevlar™ midrange speaker and 1" titanium composite tweeter.
All LSR6300 Series Studio Monitors employ Linear Spatial Reference Technology, are magnetically shielded, have mounting provisions, and are THX pm3 approved.

JBL developed Linear Spatial Reference Technology to optimize mid and high frequency accuracy at the listening position where reflected sound comes into play. Meeting frequency response criteria for seventy-two off-axis measurements, the LSR6332 ensures that not just the direct sound, but reflected sound that reaches you at the listening position is also smooth and accurate.


JBL LSR6332 Features :

• Advanced Linear Spatial Reference design ensures flatter response at the mix position.
• Neodymium Differential Drive NDD™ technology with dynamic braking for extended low frequency response and low power compression.
• Neodymium midrange with 2" voice coil and Kevlar™ cone material for extended frequency response and low distortion.
• Titanium composite high frequency transducer with elliptical oblate spheroidal waveguide and damped polepiece.
• High-Density baffle for low enclosure resonance and stable inertial ground.
• Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
• Magnetically shielded for use near video monitors.
• Reinforced enclosure and convenient mounting points allow mounted installation.
• Midrange/high frequency sub-baffle may be rotated by user for horizontal or vertical orientation.
• Available as mirror imaged left and right models. (Order LSR6332L or LSR6332R) Please Specify When Ordering!

LSR - Linear Spatial Reference Technology :
LSR ensures that our speakers sound flat at the mix position. The exact geometry of the wave guide, the interaction of the woofer and tweeter, and the network are designed to provide an accurate listening window of +/- 30 degree horizontal, +/- 15 degree vertical. As a result, the reflected sound which reaches the mix position is smooth and accurate.


JBL developed Linear Spatial Reference Technology to optimize mid and high frequency accuracy at the listening position where reflected sound comes into play. Meeting frequency response criteria for seventy-two off-axis measurements, the LSR6332 ensures that not just the direct sound, but reflected sound that reaches you at the listening position is also smooth and accurate.

JBL LSR6332 Specifications :

Input Impedance : 4 ohm (Nominal)
Anechoic Sensitivity : 93 dB/2.83 V/1 m (90 dB/ 1 W/ 1 m)
Frequency Response : +1. -1.5 dB (60 Hz - 22 kHz)
Low Frequency Extension 2 :   -3 dB : 54 Hz / -10 dB : 35 Hz
Enclosure Resonance Frequency : 33 Hz
Long Term Maximum Power (IEC265-5) : 200 W continuous average; 800 W peak
Recommended Amplifier Power : 150 W - 1000 W (rating into 4-ohm load)
High Frequency Control : 0 dB, -1 dB (2.5 to 20 kHz)
Distortion, 96 dB SPL, 1 m 3 :  
Low Frequency (below 120 Hz) :  
2nd Harmonic : <1.5%
3rd Harmonic : <0.4%
Distortion, 102 dB SPL, 1 m 3 : &NBSP;
Mid and High Frequency (80 Hz to 20 kHz) : &NBSP;
2nd Harmonic : <1%
3rd Harmonic : <1% (Note: <0.4%, 250 Hz - 20 kHz)
Power Nonlinearity : (20 Hz to 20 kHz) 30 W : <0.4 dB / 100 W : <1.0 dB
Low-Mid Frequency Crossover :
4th Order Acoustic Linkwitz-Riley : 250 Hz
4th Order Acoustic Linkwitz-Riley : 2.2

Dimensions :
(WxHxD) : (25 x 15.5 x 11.5 in)
Weight : 45 lbs