JBL VRX918SP
18" Powered High Power VERTEC Series Arrayable Subwoofer
|
The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive, 18 inch woofer in a front-loaded, vented enclosure.
The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.
Priced per each individual speaker enclosure.
|
JBL's VERTEC¨ Series Line Arrays lead the industry in large venue sound reinforcement. While intended for smaller venues than VERTEC, the VRX900 Series Constant Curvature Line Arrays are designed and built to the same high standards and uses the same advanced, concert-proven drivers. JBL's VRX900 Series speakers deliver extraordinary power handling, clarity, flexibility and, of course, stunning JBL sound in an attractive, easy to handle and affordable package. JBL VRX918SP Features : - Built-in JBL Drivepack¨ DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality.
- 18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive¨ woofer for high-power capacity and light weight.
- Integral rigging hardware for simple connection of enclosures and optional array frame.
- 20 mm threaded pole socket for solid, secure satellite speaker mounting.
- Large port area for reduced distortion.
Optional Accessories : VRX-AF array frame SRX718S-CVR: Pull-over padded cover (works with WK-4S) SS4-BK adjustable satellite speaker pole WK-4S Caster kit
JBL VRX918SP Specifications : - Power Rating : 1500 Watts Peak
- LF: Dual-Bridged Technologyª, Class D
- Frequency Range : 31 Hz to 220 Hz
- Frequency Response : 34 Hz to 220 Hz
- Maximum Peak Output : 126 dB SPL at 1m
- Bandpass Nominal Impedance : LF: 2 x 2 ohms
- LF Driver : 1 x JBL 2268FF 457 mm (18 in) dual voice coil Differential Drive¨ woofer with neodymium-magnet
- Audio Input Connector : XLR with loop through
- User
Controls : Input Attenuator (0-16 dB) , Selectable 80 Hz or 120 Hz Low
Pass, 80 Hz High-Pass enable/disable for XLR loop thru.
- Signal Processing : DSP based, resident in Input Module
- System Management : DSP based limiters for mechanical and thermal protection
- AC Power Operating Range : 90-132 VAC or 216-264 VAC, 50/60Hz
- AC Line Voltage : User selectable: 120V/240V (-15%, +10%)
- AC Input Connector : Neutrik PowerCon (NAC 3MPA)
- AC Loop Through Connector : Neutrik PowerCon (NAC 3MPB)
- AC Current Requirements : 6A per system at 120V, 3A per system at 240V
- Enclosure : 18 mm birch plywood.
- Suspension / Mounting : Optional VRX-AF line-array frame kit or 10 mm forged eyebolts
- Finish : Black DuraFlexª finish
- Grille : Powder coated, black, 16-gauge perforated steel with acoustically transparent foam
- Dimensions (H x W x D) : (20.0 in x 23.5 in x 29.5 in)
- Net Weight : 85 lbs
Optional Accessories : VRX-AF array frame SRX718S-CVR: Pull-over padded cover (works with WK-4S) SS4-BK adjustable satellite speaker pole WK-4S Caster kit
|
![]() |
More Images (click to select)
Roll over the image on the left for a closeup view.
|
|
|
|
