Manley 16x2 Line Mixer

The Manley 16x2 Line Mixer "LINE version" has 16 line inputs, with one aux send per channel. The LINE version is intended for workstations and allows users to avoid the digital mix buss which is often less than great sounding. Folks with huge expensive keyboard rigs who have inexpensive mixers that just ain’t cutting it have also been grabbing up the Manley 16x2 LINE version mixers.

Each of the 16 channels has a volume control, pan and aux knobs plus lit EAO solo and mute buttons. Internal jumper to allow Aux to be Pre-Fade, Pre-Mute, or Post-Fade and Mute.


The Manley 16x2 Line Mixer Features :
XLR/1/4” combo inputs
direct outputs post fader balanced 1/4” One mono Aux mix
stereo Ext input (for linking) (no gain trim)
stereo Tape return
Mix gain with both XLR balanced and 1/4” +4 dBm unbalanced outputs
5 position Monitor select including mono
2 VU meters
Monitor level
mute
dim
Main/Mini outputs (unbalanced)



What's in this thing?
The channel input jack is a Neutrik Combo which accepts XLR or 1/4" phone plugs. It is perfectly happy with either balanced or unbalanced sources. In the MIC version, the XLR has the appropriate 2400 ohm impedance and switches to 68K for the 1/4" plugs. There are balanced direct outputs on every channel post fade and pre cut for multi-track recording.

Each channel uses the best sounding chips we know of (Burr Brown INA103, OPA2604, Linear Technology LT1010) in Hutch’s circuits with exceptional headroom and very low noise, real pro level input and output levels, and bulletproof Manley quality throughout. Spec-wise know of no mixer ever with better headroom or higher output levels and, well, this mixer’s subterranean noise floor and crosstalk figures are simply quite amazing. The signal path has just 3 superb polystyrene caps from input to output. No carbon resistors, just 1/2 watt metal film, Bourns conductive plastic pots, Grayhill stepped attenuators, etc. All the good stuff.

Sorry we didn’t make this thing all-tube for "ad appeal" and sales hype. We certainly could have, but this puppy would have grown into the size of a small house, and needed an accompanying 5-Ton AC unit. However, the tube mix amps/line drivers are right at the end and impart that "Manley Sound" to your final outputs with all the richness, loudness and BIG sound you expect from us. Built like a tank and easy to service.

Mutes and Solos use superior relay switching techniques not crummy FETs or CMOS switching. Please! The Solo is of the "mute everything else" type. The buttons are EAO Series 19 and light up to indicate Mute and Solo. Insert and Phase Reverse also use high quality relays and both functions have tiny switches and red LED’s to clearly indicate when they’re selected.

The master section provides mixdown to 2 channels achieved with similar tube circuits as used in the Massive Passive, featuring two each 12AT7 NOS Phillips & 6414 NOS GE or Raytheon dual triodes. External inputs allow two or more mixers to be combined for 32 or more channels with a mini-banana post linking the Solo functions. There are both transformer balanced and transformerless unbalanced (+4dBm) outputs with tons of headroom, +36dBu, about 10dB better than million-dollar consoles. The master section has an aux mix gain (master effects send) in the LINE version and an Ext input gain in the MIC version. There are two sets of monitor outputs, MAIN and MINI, so you can feed two different sets of power amps or powered speakers. We included MUTE and DIM buttons plus a rotary switch to monitor the main mix, the mono mix, 2 track tape playback (more balanced inputs), the Ext inputs (for linked consoles or effects returns), and the aux mix (only on LINE version).

The dedicated power supply unit cranking out all the necessary filtered and regulated DC voltages to power up this beast is external further reducing noise and heat.

Manley 16x2 Line Mixer Specifications :

Channel Input to Mix Output:

Frequency Response Unity Gain 5 Hz to 100 KHz -1 db

THD + N Unity Gain (+0 dBu) .05% (-65 dB)

S/N Output @ +33 dBu 109 dB 22Hz-20KHz

Noise Floor 22 Hz to 20K -80 dBu typical

Maximum Gain Mic = +60 dB Mix Gain +10 dB (Mic = 70 dB)

Maximum Output (Mix Gain +10) +33 dBu Balanced

Main Buss Vacuum Tubes: 2 x 12AT7 NOS Phillips; 2 x 6414 NOS GE or Raytheon

Power Consumption (120/240 VAC): 144 watts

    * Factory set for 100V, 120V or 220-240VAC operation for original destination country's mains voltage.
    * Operating Mains Voltage changeable with power transformer primary switch and fuse value change.
    * Mains Voltage Frequency: 50~ 60Hz

 

Dimensions:
19" x 8.75" x 6.25" (occupies 5U)
PSU: 13" x 3.5" x 11.5" (rack mount kit available)

Shipping Weight: 38 lbs with PSU