Meyer MICA Mid-Sized Array Loudspeaker
The MICA compact high-powered curvilinear array loudspeaker is the mid-sized member of the acclaimed MILO family of loudspeakers. MICA brings the very high output and smooth, extended high-frequency response that is the MILO family’s sonic signature to a smaller package with broad 100-degree horizontal coverage. This makes MICA ideal for applications that do not require quite as much power and throw distance as MILO or where weight and size are a concern. MICA is suited to a wide variety of applications such as touring, rental, and fixed installation, and its sonic compatibility with MILO makes it an excellent component in a MILO family system.
Very high power-to-size ratio
Exceptional fidelity and transient
response for intelligibility and
high-impact
Seamless integration with MILO or M'elodie
Wide and even horizontal coverage pattern
QuickFly rigging system with captive GuideALinks simplifies use in flown or groundstacked arrays
Applications
Performing arts centers, theatres, churches, and other fixed installations Touring sound reinforcement for mid-sized venues
Sidefill hangs with MILO in large venues
Acoustical
Operating Frequency Range:60 Hz - 18 kHz
Frequency Response: 75 Hz - 17 kHz ±4 dB
Maximum Peak SPL: 138 dB
Coverage
Horizontal:100°
Vertical: Varies, depending on array length and configuration
Transducers
Low/Low-Mid Frequency:
Two high-power 10" cone drivers with neodymium magnets
Nominal impedance: 4 Ω
Voice coil size: 2"
Power handling capability: 1200 W (AES); 1800 W peak
High Frequency:
Two 3" compression drivers
Nominal impedance: 8 Ω
Voice coil size: 3"
Diaphragm size: 3"
Exit size: 1.2"
Power handling capability: 360 W (AES)4; 720 W peak
Audio Input
Connector: Female XLR input with male XLR loop output or VEAM all-in-one
connector (integrates AC, audio, and network)
Amplifier
Type: Four-channel complementary MOSFET output stages (class AB/H)
Output Power: 3020 W (four channels; 2 x 950 W, 2 x 560 W)
Total Output: 6000 W peak
AC Power
Connector: 250 V AC NEMA L6-20 twistlock, IEC-309 male, PowerCon, or VEAM
Automatic Voltage Selection: Automatic, two ranges, each with high-low voltage tap (uninterrupted)
Turn-on and Turn-off Points: 85 V AC - 134 V AC; 165 V AC - 264 V AC
Max Long-Term Continuous Current (>10 sec):
8.7 A rms (115 V AC); 4.3 A rms (230 V AC); 10.0 A rms (100 V AC)
RMS Network
Equipped with two-conductor twisted-pair network, reporting all
operating parameters of amplifiers to system operator’s host computer
Dimensions: 41.40 w x 13.37 h x 17.78 d
(1052 mm x 340 mm x 452 mm)
Weight: 150 lbs (68.04 kg)
Enclosure: Premium birch plywood
Finish: Black textured
Protective Grille: Powder-coated, hex-stamped steel, black mesh
Rigging: QuickFly rigging with four captive AlignaLinks in the bottom
corners of two aluminum and steel end frames, secured with
quick-release pins
|
![]() |
More Images (click to select)
Roll over the image on the left for a closeup view.
|
|
|
|
