Meyer MILO 120 Four-Way Loudspeaker
|
The self-powered MILO 120 is a compact, lightweight four-way system that provides 120 degrees of horizontal and 20 degrees of vertical coverage. In addition to its expanded coverage pattern, the MILO 120 loudspeaker is optimized for medium to near field applications, making it the perfect downfill complement for standard MILO or M3D line array loudspeaker systems, or in other fill applications that can be satisfied by one or two cabinets. MILO 120 can also be used by itself to form wide coverage arrays or as a single cabinet.
|
Extreme coverage angles of 120 degrees (horizontal) and 20 degrees (vertical)
High-power output (138 dB SPL peak)
Compact cabinet
QuickFly components compatible with existing MILO and other M Series products
Optional MILO 120-I insert enhances appearance of arrays and provides a small acoustical benefit
Applications
Stadiums, arenas, concert halls and theaters
Touring sound reinforcement
Large-scale events
Acoustical
Operating Frequency Range
60 Hz - 18 kHz
Frequency Response
65 Hz - 17.5 kHz ±4 dB
Phase response: 750 Hz - 16 kHz ±30°
Maximum Peak SPL: 138 dB
Dynamic range: >110 dB
Horizontal coverage: 120°
Vertical coverage: Varies, depending on array length and configuration; for single loudspeaker, 20°
Acoustical crossover: 560 Hz, 4.2 kHz
Transducers
Transducers: Low/Low-Mid Frequency
Two 12" cone drivers with neodymium magnets
Nominal impedance: 4 Ω
Voice coil size: 4"
Power-handling capability: 1200 W (AES) on REM
Transducers: Mid-High Frequency
One 4" compression driver
Nominal impedance: 8 Ω
Voice coil size: 4"
Diaphragm size: 4"
Exit size: 1.5"
Power handling capability: 250 W (AES) on REM
Transducers: Very-High Frequency
Three 2" compression drivers
Nominal impedance: 12 Ω
Voice coil size: 2"
Diaphragm size: 2"
Exit size: 0.75"
Power handling capability: 100 W (AES)on REM
Amplifiers
Amplifier type: Complementary power MOSFET output stages (class AB/H)
Output power: 3560 W ( four channels: 2 x 1125 W, 1 x 560 W, 1 x 750 W)
THD, IM TIM: <.02%
Loading capacity: 4 Ω low and mid; 8 Ω high channel; 6 Ω very high channel
Cooling: Forced air cooling, 4 fans total (2 ultrahigh-speed reserve fans)
Audio Input
Audio Connector: Female XLR input and male XLR loop output or VEAM connector (integrates AC, audio and network)
AC Power
AC power connector: 250 V AC NEMA L6-20 (twist lock) inlet, IEC 309 male inlet or VEAM connector
Max. Long-term Cont. Current Draw (>10 sec)
11.2 A RMS (115 V AC); 5.6 A RMS (230 V AC); 12.9 A RMS (100 V AC)
Amplifier Power: 3560 W (Four channels: three x 1125 W, one x 560 W)
Voltage Selection: Automatic, two ranges, each with high-low voltage tap
Safety Agency Rated Operating Range: 95 V AC – 125 V AC, 208 V AC - 235 V AC; 50/60 Hz
Turn-on and Turn-off Points: 85 V AC – 134 V AC; 165 V AC - 264 V AC
|
![]() |
More Images (click to select)
Roll over the image on the left for a closeup view.
|
|
|
|
