Peluso CEMC6 Stereo Kit

The Peluso CEMC6 solid state microphone has a 20 millimeter gold-sputtered diaphragm and a fixed cardioid pickup. Solid State Condenser microphones are very sensitive, capable of producing very subtle sonic details. They also pick up sounds outside the pattern, which can lead to powerful feedback.
Peluso advises experimentation with placement and isolation with the gain initially set low to avoid equipment damage.


Power Requirements :
Important - These mics require phantom power at 48 volts, +/- 4 volts.
Each unit has been thoroughly checked before shipping, so if you hear no sound, check the cables, and that the phantom power on your mixer or separate power supply is switched on.

Microphone Cables :
The microphone cable can have a profound effect on the sound of any microphone. Even the finest microphones will sound poor if the interconnect cable allows noise to enter, or causes distortion and degradation of sound. Use only the best microphone cable to obtain the optimum performance from your microphone.

Care :
Dust and foreign material can degrade the performance of a microphone over time, so always store the unit in its case. Remove fingerprints from the exterior with a camp soft cloth.


Warranty :
Peluso microphones are guaranteed against defects in material and workmanship for 3 years from date of purchase. Should you encounter any problem with this unit, promptly contact the company you purchased it from for assistance. The original dated sales receipt will be necessary for any warranty claim. Do not send any unit directly to Peluso Microphone Lab without prior authorization from our service department. Warranty coverage is limited to repair or replacement (at our option) of the microphone, and does not cover incidental damages due to use of this unit, nor damage caused by accidental misuse of this product.


About Peluso Microphone Lab :
Each of Peluso's microphones are hand-crafted, using the finest components. All the tubes in our microphones have been tested and hand selected in our lab to insure the highest quality and lowest noise possible. We carefully test and listen to each microphone, and all the components of systems, during construction and prior to shipment. Our commitment is to bring you the best possible microphone at a fair and affordable price.

Peluso has a full service repair lab with an extensive stock of vintage parts and a full service diaphragm repair lab. They offer the benefit of twenty-six years of experience repairing and restoring all brands of vintage and modern Microphones.

Peluso CEMC6 Stereo Kit Specifications :

• Factory Matched Pair of CEMC6 Small Diaphragm Cardioid Pencil Microphones
  
• Type: Condenser Pressure Gradient w/ 20mm capsule
• Polar Pattern : Cardioid
• Frequency Range: 19 Hz to 25 kHz
• Sensitivity: 10mv/pa
• Impedance: 200 ohms
• SPL: 156 db w/ 20db pad
• Equivalent Noise: 14db (A-weighted)
• Power Requirements: Phantom - 48v +- 4v
• Current Consumption: < 3.0 MA
• Size: 22mm x 164mm (each)
• Weight: 134 g (each)