Radial Headbone TS

The Radial Headbone is an advanced ‘head switching device’ that allows two different guitar amplifier heads to be used with a single speaker cabinet. With Headbone, one head could, for instance, be used for rhythm while a second head could be used for soloing. With 100% discreet class-A circuitry and choice of either buffered or un-buffered inputs, the Headbone will be of particular interest for players that demand the utmost in tonal performance. The Headbone’s internal switching comprises a sequence of relays, photocells, and load resistors, all of which are controlled via a digitally programmed chip. Hit the footswitch and the Headbone toggles the guitar signal from one amp to the other, disconnects the speaker and diverts the signal to a load resister, reconnects the speaker to the second head and turns on the guitar, all in quick succession. To ensure safe and reliable performance, the Headbone features SafeMode™ whereby even when power is disconnected, the Headbone will automatically default to a ‘head-1 to cabinet’ status, ensuring a constant and safe load on the amplifier. For large stages, the Headbone is equipped with Slingshot™, an easy to use remote control system that employs a standard foot switch or contact closure that enables the guitarist to toggle the Headbone’s status from his pedal board. This eliminates running guitar and speaker cables to-and-from the pedal board and the amplifier. The Headbone TS switches between tube and one solid state amplifier. Microprocessor-controlled relays, photocells and load resistor to ensure the safe transition between heads. Buffered or direct inputs and 100% discreet, Class-A circuitry for natural tone. Slingshot™ remote control with any latching footswitch. Max 100W. Use of 12-gauge speaker cables are required for high gain amps. Comes with 15VDC supply.