Radial HotShot DM1

The Radial HotShot DM1 allows the vocalist to depress to mute his mic with a footswitch and redirect the signal to the monitoring system and/or intercom. This passive floor box is equipped with an XLR mic input, momentary footswitch, and main and monitor XLR outputs.
The mic is plugged into the box and split to two outputs (typically one would go to the main PA while the other to the monitor system, but there are many other applications). When the momentary footswitch is depressed, one output is muted, while the other is sent to its regular destination.


Radial HotShot DM1 Features :

• Passive floor-box / stompbox design
• On stage mic mute and signal redirect
• XLR mic input
• Main and monitor XLR outputs
• Designed for dynamic microphones
• Momentary switch for one-push operation
• Allows discreet communication with band and crew
• Toggle to second mic channel with or without effects
• Ground lift to eliminate buzz caused by ground loops

Designed specifically for dynamic microphones, the DM-1 HotShot is a simple passive that features an XLR input, momentary foot switch and two XLR outputs designated 'main' and 'monitor'. The microphone connects to the input and the main output connects to the sound system as usual. The monitor output is connected to the monitor desk where the monitor engineer can route the signal to the musicians on-stage monitoring systems and if desired, to the technical crew. Should a problem occur; a change of song during a set; or a level require adjustment, the vocalist need merely depress his HotShot foot switch and he is now able to converse in confidence.



As with all Radial stage switchers, the HotShot DM1 is designed to take the abuses of the road with it's rugged 14-gauge steel construction, baked enamel finish, heavy-duty isolated XLR connectors and switch.