Radial JPC
Consumer Level Signal to Pro Level Signal Direct Box
|
A stereo DI specifically intended for bringing stereo consumer-level signals up to +4 pro levels with absolutely no compromise in sound. Hook up your PC sound card, iPod, cassette deck, DJ mixer etc. to a pro recording console with ease. This little box has a passive design (no wall wart, no battery, no hum!) and is built to last.
|
• Stereo DI for computer sound cards & A/V
• Transformer isolation eliminates ground loops
• Converts -10db to balanced XLR mic level
• Active drive circuit for long cable runs
• Compact design - may be J-Rak mounted
• 48V phantom power eliminates batteries
• Ultra rugged 14-gauge steel construction
The
Radial JPC is a stereo direct box that has been specifically designed for use with computer sound cards and other consumer electronic products to allow these to be connected to a professional sound system.
It is unique in that it combines the advantages of transformer-isolated inputs with an active drive circuit, giving you the ‘best of both worlds’ in a compact and extremely flexible package.
Transformer coupled inputs have the unique advantage of isolating the ‘source’ from the ‘destination’. This proven approach eliminates 60-cycle hum and buzz caused by so-called ground loops when two pieces of electrically powered devices are connected together.
Because the active circuit does all of the impedance conversion and balancing, a dedicated 1:1 transformer can be used. This results in a hybrid design that is at once great sounding, compact and more affordable.
As with all great designs, simplicity is a fundamental trait and the Radial JPC certainly fits the bill. A choice of stereo ¼”, 1/8” and RCA input AND thru-put connectors make interfacing a snap with all types of equipment.
A single switch inserts a –10dB pad, two power LEDs confirm 48V phantom is turned on, and a pair of XLR output connectors round out the feature set.
Of course like all Radial products, the JPC is built to handle any environment.
The book-cover wrap-around sleeve design protects switches and connectors from damage while the 14 gauge steel I-beam construction eliminates stress that could torque the PC board and cause solder joint failure.
A full-bottom no-slip pad provides electrical insulation and mechanical isolation with plenty of ‘stay-put’ for use on hectic stages. And with its baked enamel finish, the Radial JPC will continue looking great for years!
|
![]() |
More Images (click to select)
Roll over the image on the left for a closeup view.
|
|
|
|