Specifications
Frequency Response: Signal to Noise:
Distortion (THD): Inputs:
Input Impedance: Outputs:
Output Impedance: Channel Separation: Front Panel Indicators/Controls:
Bypass Mode: Failsafe Mode:
Power Requirements:
Power Consumption:
Dimensions: Note: 0 dBu = 0.775 Vrms (Specifications subject to change without notice)
20 Hz – 20 kHz +/- 1 dBu (in bypass mode)
>100 dB typical (A-weighted) with all processors active and levels at maximum
<.015% +4 dBu, 20 Hz – 20 kHz with Voice Clarity on and levels at maximum
2 active balanced XLRs (Pin 2 “hot” per AES Standards); +4 dBu nominal input level; +24 dBu maximum input level
25 kΩ
2 active balanced XLRs (Pin 2 “hot” per AES Standards); +4 dBu nominal output level; +24 dBu maximum output level
100 Ω
-80 dBu
- Power
- Process In/Out selector & status LED
- Input level meter (10 LEDs per channel); 3 dB steps
- Input mode selector with clip indicator @ +24 dBu
- SRS Process selector & status LED - Center Level potentiometer - Space Level potentiometer - TruBass selector & status LED
- TruBass level potentiometer
- Voice Clarity selector & status LED
- Voice Clarity level potentiometer
- Output level potentiometer
- Output level meter (10 LEDs per channel); 3 dB steps with clip indicator @ +24 dBu
Unity gain; Hardwire through relays
Unity gain; Hardwire through relays; No power input
110/220 VAC 50/60 Hz manual switchingt
35 W maximum Rack mount; 1 ru (1.75” x 19” x 10.25”)