Weiss EQ1- MKII
|
Gambit Series - Dual 7 Band Digital Parametric EQ, 24 bit / 96kHz
|
Adding to the high resolution 24bit / 96kHz
processing, the EQ1-MK2 now features a
widely extended parameter set. The Q
reaches from a near whole-bandwidthcovering
0.2 to a needle-like 650 in 128
steps, allowing everything fromsubtle sound
colouring to notch filter tone removal. The
boost varies in 0.1 dB steps from-39dB (for
notching) to +18dB. To compensate for the
extremely accurate notch filter type, the
frequency resolution has been doubled, now
running from14Hz to 21kHz in 12th octave
steps plus including special notch
frequencies such as 50 and 60 Hz and their
harmonics.
As of software version 4.1, a “shape”
parameter is applicable to shelving filters,
which has a similar effect like Q for peaking
filters. Also included is a completely new
mode of operation where equalization is
done in the M/S domain.
This wealth of innovative features and its
unique sound put the EQ1-MK2 at the very
top of equalizer tools, confering ultimate
control over spectral content of the
progamme to the sound engineer.
Audio Processing
Seven bands per channel, each band switchable to
either peaking, shelving or cut filter, or bypass.
24bit single-wire hi-speed AES/EBU interfaces for
signals up to 96kHz sampling rate
Internal processing at 96kHz, 40bit floating-point.
Output 24bit, can be dithered to 16 or 20bit.
Audio optimized filter architecture
Display
Double logarithmic graph of the magnitude function
of the equalizer calculated in real time
Status display showing sampling frequency, channel
status data handling, current workspace and
snapshot number and a resetable peak-hold and
over-hold per channel
Band display (activated by touch) showing boost, Q/
slope and frequency settings for each band
Two over-LED's with settable number of
consecutive over-samples which cause an ""over""
display combined with an over-hold function
Snapshots
3 x 128 non-volatile snapshots where all
parameters are stored
A-B workspaces for quick comparison between
two settings
Remote Control
Supports MIDI, RS-232 and RS-422 protocols
Standard MIDI Continuous Controllers for
parameter remote control (including overall gain)
Snapshot automatization with MIDI Program
Change Commands
MIDI Dump of Snapshots
|
![]() |
More Images (click to select)
Roll over the image on the left for a closeup view.
|
|
|
|