Dynaudio M3XE (Pair) 3-Way Passive Monitors with Quad X-Over
$17,000.00
Features of Three-Way Main Monitor with handcrafted drivers and For in-wall or free-standing setups.
Please check with us about availability
Description
Dynaudio M3XE (Pair) 3-Way Passive Monitors with Quad X-Over
For Mastering, Tracking and Mixing. Quad X Over.
The Dynaudio M3XE Professional monitor system that takes monitoring to a whole new level with a significant upgrade from its predecessor – the renowned M3A Dynaudio M3XE 3-way monitor.
With the newest and most pristine Dynaudio ESOTAR² driver technology, M3XE takes over where most other monitor systems give up. With unsurpassed attention to detail, underpinned by an impressive 22Hz – 21kHz frequency response and beyond 135dB SPL, M3XE leaves no room for desire in terms of resolution, range or sheer power.
Features:
- Three-Way Main Monitor
- Handcrafted drivers
- For in-wall or free standing setups
To learn more about Dynaudio, Click Here
Additional information
| Weight | 150 lbs |
|---|---|
| Condition | New |
| Brand | Dynaudio |
Technical Specifications
M3XE:
- System: 3-way Active Main Monitor
- Frequency Response (+/- 3dB): 22Hz - 21 kHz
- Peak SPL 1m, Pair (IEC Short Term): > 135dB peak
- Resonance Frequency: 24 Hz
- Internal Cabinet Volume: 145 liters
- Bass Principle: Bass reflex
- Amplifer: 1 Lab.gruppen PLM 12k44 (per speaker)
- Tweeter: Esotar² 28 mm soft dome magnetic fluid, Metal rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front, Neodym magnet material
- Midranges: 15 cmwith 75 mm diameter pure alu wire voice coil, MSP-cone, long stroke
- Woofers: Esotar 30 cm with 75 mm diameter pure copper wire voice-coil, MSP-cone, long stroke
- Weight: 65 kg
- Dimensions (WxHxL): 555 x 775 x 505 mm
- Cabinet: 25 mm MDF. Strategically braced and damped. Low turbulence reflex-ports. Separate chambers for each woofer
- Crossover: All 4 channels: Active dsp-based in amp-amp Lake processor. Each channel has impedance-correction providing the best working conditions for the amplifier
PLM 12k44:
- 3000 W per channel @ 2.67 ohms
- 3000 W per channel @ 4 ohms
- 2U chassis weighing only 16.5 kg (36 lbs)
- Class TD® output stage
- Universal (70 - 265 V) Regulated Switch Mode Power Supply (R.SMPS™) works anywhere in the world
- Power factor correction (PFC) helps maintain full output during extended power bursts
- Copper-finned Intercooler® with transverse-mounted output devices
- Comprehensive loudspeaker preset database
- LoadSmart™ load verification
- Dante™ low-latency digital network included as standard
- Compatible with Lake LM Series, and Lab.gruppen PLM and D Series
- Primary and secondary network connections
- Digitally controlled and recallable “amplifier gain” adjustable in 0.1 dB steps
- Digital output attenuation in 0.25 dB steps from -inf to 0 dB
- Binding post or Neutrik® speakON® output connectors
- Digitally implemented, zero-overshoot Inter-Sample
- Voltage Peak Limiting (ISVPL) adjustable in 0.1 V steps from 17.8 to 194 V
- Breaker Emulation Limiter (BEL) prevents mains tripping
- Under-Voltage Limiting (UVL) enables continued operation with mains voltage sags as low as 65 V
- High-Resolution daylight viewable LCD display
- Moisture resistant silicone touchpad
- 3000 W per channel @ 2.67 ohms
- 3000 W per channel @ 4 ohms
- 2U chassis weighing only 16.5 kg (36 lbs)
- Class TD® output stage
- Universal (70 - 265 V) Regulated Switch Mode Power Supply (R.SMPS™) works anywhere in the world
- Power factor correction (PFC) helps maintain full output during extended power bursts
- Copper-finned Intercooler® with transverse-mounted output devices
- Comprehensive loudspeaker preset database
- LoadSmart™ load verification
- Dante™ low-latency digital network included as standard
- Compatible with Lake LM Series, and Lab.gruppen PLM and D Series
- Primary and secondary network connections
- Digitally controlled and recallable “amplifier gain” adjustable in 0.1 dB steps
- Digital output attenuation in 0.25 dB steps from -inf to 0 dB
- Binding post or Neutrik® speakON® output connectors
- Digitally implemented, zero-overshoot Inter-Sample
- Voltage Peak Limiting (ISVPL) adjustable in 0.1 V steps from 17.8 to 194 V
- Breaker Emulation Limiter (BEL) prevents mains tripping
- Under-Voltage Limiting (UVL) enables continued operation with mains voltage sags as low as 65 V
- High-Resolution daylight viewable LCD display
- Moisture resistant silicone touchpad
Related products
These high-end passive monitors employ custom-designed drivers, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver the natural, transparent, un-hyped sound you need to make critical mixing decisions.
These high-end passive monitors employ a custom-designed 6.5" woofer, a fast-response titanium tweeter, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver the natural, transparent, un-hyped sound you need to make critical mixing decisions.
These high-end passive monitors employ custom-designed drivers, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver the natural, transparent, un-hyped sound you need to make critical mixing decisions.
It ensures a rock-solid "phantom" center image, exceptional time and phase coherence, spectacular 3D soundstage and imaging, and an extremely wide and deep sweet spot, utilizes a 1" (25mm) titanium dome tweeter set in a Corian waveguide, tweeter is meticulously aligned with a 4.5" (115mm) woofer.
These high-end passive monitors employ custom-designed drivers, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver the natural, transparent, un-hyped sound you need to make critical mixing decisions.
You have not viewed any products yet.