|
|
Meyer Sound MSL-6
Horn-Loaded High-Q Loudspeaker, Arrayable. With Pivoting Lift Rings
|
Designed specifically for very large-scale sound reinforcement, the self-powered Meyer Sound MSL-6 is ideally suited as a stand-alone system for vocal public address applications. For high-powered music reinforcement, it works in combination with Meyer Sound subwoofers and/or the DS-2P and DS-4P Horn-Loaded Mid-Bass loudspeakers.
|
The MSL-6 contains two 12-inch low-frequency cone drivers and three
high-frequency compression drivers in an arrayable, trapezoidal cabinet with
integral electronics. The center and outer high-frequency horns utilize separate
amplifiers and control electronics to achieve a 30-degree horizontal coverage
angle. The MSL-6’s 25-degree vertical coverage angle allows long-throw arrays of
up to three vertical rows with minimal high-frequency overlap.
An
integrated, four-channel amplifier with complementary MOSFET output stages
provides total peak power of 2480 watts (620 watts/channel, four channels). The
MSL-6 features TruPower limiting, phase-corrected control electronics and an
Intelligent AC power supply.
The MSL-6’s standard rigging hardware
comprises 12 pivoting lift rings with a 5:1 safety factor. An internal steel
framework carries all load stresses. An optional MRF-6 rigging frame allows
integration of the MSL-6 into QuickFly systems.
The MSL-6 is compatible
with Meyer Sound’s RMS remote monitoring system, which provides comprehensive
monitoring of operating parameters over a Windows-based network.
|
![]() |
More Images (click to select)
Roll over the image on the left for a closeup view.
|
|
|
|
|
