Midas Pro1 IP
40-channel Digital Mixer - 24 Mic/Line Inputs, 15" Color Display Screen, USB, Ethernet I/O Expandability
Standard Midas PRO1 Install Package: 40 channel x 27 bus digital audio mixing system. Includes PRO1 console (Boxed) loaded with 24 mic/line inputs, 24 analogue outputs 2 AES3 inputs and 3 AES3 outputs.
The Midas PRO1/IP 40-channel Digital Mixer
is a compact stand-alone mixer that sounds great and will be instantly familiar to a wide variety of mixing engineers. The IP version of this console is meant for installation applications, and like all of the Midas Digital Mixers
, an be remotely controlled from an iPad.
The PRO1 breaks new ground for MIDAS digital consoles, featuring an
all-new, lightweight aluminium frame, PRO1 is the first stand-alone
MIDAS digital console, and sets new standards of portability and
performance for a ''compact'' digital console. The IP version of this
console is meant for installation applications. (iPad Not Included)
PRO1 is easy to configure and operate. Engineers who are new to MIDAS digital can relax, enjoy the PRO1’s sample-synchronous audio quality, and mix from well within their comfort zone.
Engineers familiar with MIDAS can just load their existing showfile straight into the PRO1, regardless of which MIDAS digital console it was created on, and carry on working.
Additional I/O Unit Options
- 100 inputs x 102 outputs (max capacity) point-to-point routing anywhere within the Network
- 24 mic/line inputs with MIDAS mic preamps
- 48 simultaneous input processing channels
- 24 analogue outputs (including 2 stereo local monitor outputs)
- 3 AES3 outputs
- 2 AES3 inputs
- 27 sample-synchronous, phase-coherent mix buses
- Up to 12 multi-channel FX engines
- Up to 28 KLARK TEKNIK DN370 31-band Graphic EQs
- Full-colour 15" daylight-viewable display screen
- 8 VCA (Variable Control Association) groups
- 6 POPulation groups
- 96kHz 40-bit floating-point processing throughout
Control Centre Weight and DimensionsPRO1Width 685.20mm x Depth 722.14mm (26.98" x 48.43") Weight: 21.5Kg (47.5lbs)**weights are approximate and out of flight caseOptional Accessories:
- DL431 24 in 5 way split: fixed
- configuration I/O
- DL251 48 in / 16 out fixed configuration I/O
- DL252 16 in / 48 out fixed configuration I/O
- DL351 Up to 64 in / 64 out configurable I/O
- DL451 Up to 24 in / 24 out configurable I/O
MixerIn addition to the PRO1’s 40 primary input channels, it features 8 aux returns, all of which feature 4-band MIDAS parametric EQ and insert points. These 8 aux returns can be used as returns for the PRO1’s internal FX processors, or as additional mic channels, if enough mic inputs are available on the network I/O hardware.A total of 48 input channels have routing to 27 mix busses. These busses comprise 16 user-configurable aux busses, which can be mixes, subgroups or mix minus groups, and 8 matrix busses. The Matrix busses source from inputs, as well as groups, and so can be used as 8 additional auxes (monitor mix and FX sends) which provides a total of 24 mixes (plus L, R & Mono) for monitor mixing duties. All busses can be linked as stereo pairs (except the MONO buss).As with all MIDAS digital consoles the audio paths can be routed to multiple destinations and the console format can be reconfigured live on a scene-by-scene basis.HardwareThe PRO1 is MIDAS’ first stand-alone digital console with 24 inputs located on the rear panel. However there are a number of optional MIDAS digital I/O units – either with fixed or modular configurations - which can be connected by inexpensive Cat5-e cable that will expand the input count to 48. To further increase flexibility a number of I/O boxes can be connected to the PRO1, up to 100m (300ft) cable distance from the console, allowing audio point-to-point routing of up to 100 inputs x 102 outputs from anywhere within the Network.
- KLARK TEKNIK DN9331 Rapide Graphic Controller
- KLARK TEKNIK DN9696 96 track High Resolution Audio Recorder
- KLARK TEKNIK DN9650 Network Bridge (MADI, Dante, Aviom, Ethersound, CobraNet)
MIDAS Digital Sound QualityThe MIDAS reputation for fantastic audio quality has evolved over 40 years of development and research. By designing the best mic pre’s, equalisation and using the superior components, MIDAS has carried this tradition into the digital realm. Adding the best converters and custom processing algorithm to the mix MIDAS, takes audio quality to another level. In addition MIDAS digital systems are the only live sound systems in the world to have a comprehensive and automatic latency management system. Which, in addition to managing all internal routing and processing latency, also includes compensation for external analogue inserts. This means that all audio samples are synchronized before summing, resulting in absolute phase coherency at all outputs.MIDAS digital feels, as well as sounds superb. All the variable controls on the console are genuine analogue high precision potentiometers, not mechanical encoders. These access the FPGA-DSP engine through precision instrumentation A-D converters and MIDAS’ custom interpolation algorithms. This means that as well as all audio, all operator input is fully interpolated to ensure a linear, analogue-style, silky smooth “feel” to your mix.The MIDAS microphone pre-amp is the one by which all others are judged. Still built from discrete components, and still based on the designs which were so successful in the legendary MIDAS analogue consoles such as the XL3, XL4 and Heritage, the current expressions in the XL8 range and PRO Series sound better than ever. Whether you want pristine, transparent reproduction, or that renowned MIDAS warmth and colouration, MIDAS’ dual (analogue and digital) gain stages enable you to shape the mic amps’ character according to your own preference.A major problem affecting many digital consoles is a lack of attention to delay management. All digital processing takes time to run – typically just a few samples, but never zero. ADCs and DACs have much bigger delays (typically a few milliseconds) so if analogue insert points are used, the channel in question will be delayed significantly relative to the others.Mix engineers working on analogue consoles routinely combine signals with different signal paths and processing and expect to do the same with digital. On many current digital consoles, combining signals in this way leads to the summing of signals that are in effect partly out of phase. This causes undesirable “comb filtering” effects, where specific frequencies are cancelled out completely. All MIDAS digital consoles have comprehensive automatic time alignment to correct any path related delays. Plus the additional latency introduced by the A to D conversion on the analogue inserts is also automatically compensated.
- The fixed-format, integrated audio I/O on the rear of the surface features the following connections:
- 24 x analogue mic/line inputs with MIDAS mic pre's (XLR)
- 16 XLR analogue outputs
- 2 x AES3 inputs and 3 x AES3 outputs (XLR)
- 3 x AES50 ports (RJ45)
- Local monitor A L&R and Local monitor B L&R (XLR)
- Left, Right and Mono master outputs (XLR)
- Talk output (XLR)
- Talk Mic input (XLR)
- Additional non-audio rear panel connections are:
- MIDI in, out and through
- AES3 clock in and out (XLRM & XLRF)
- Wordclock in and out (2 x BNC)
- Video (black burst) sync in (BNC)
- DVI video output from console screen (DVI)
- Ethernet control port (Ethercon RJ45)
- USB port (USB A)
Unique to MIDAS digital are the I/O and DSP units which can be freely distributed into multiple locations. In particular I/O units can be placed exactly where they are needed – on the stage, around the auditorium, at FOH or remotely in a broadcast truck. MIDAS’ digital audio network is easily configurable to route signals from where and by when they are needed since the patching is done a scene-by-scene basis.Every transition of a network adds delay. MIDAS networks have only 70 micro-seconds of latency per hop so even a multi-hop routing has negligible aggregate delay (latency) making it perfect for in-ear monitoring. All inputs and all outputs are time-aligned to sample accuracy, no matter where they are in the network or how they are routed. This is another major contributor to the performance of a MIDAS digital console and that magical MIDAS sound.Navigating the ChannelsThe concept of “paging” or “layering” is eliminated; instead the operator is invited to create groups of mix or musically related channels, which are structured around the process of mixing the show. This is preferable to locating target channels from arbitrary “layers” or “pages” which have no logical delineation and often start and end at inconvenient points (i.e. half-way through a logical sequence of inputs).
There are two types of groupings available on PRO1, VCA (Variable Control Associations) and POPulation groups. These groups are identified using colour coding and labelling with supported from the full-colour daylight-visible TFT screen. Selecting a VCA or POP group will bring all of the members of that group to the designated area on the control surface, populating from the VCA area out to the left. If the group has more members than the 8 physical input channels they can be viewed either by scrolling the input faders or by pressing the EXTEND button, which will populate the 8 VCA faders with additional members of that group giving a total of 16 input faders.
An operator used to “layers” of faders can programme the POPulation groups to mimic this way of operation, so navigating between 3 layers of 16 input faders to access the PRO1’s 48 input channels is easily achieved.
Navigation ModeWhen a MIX SELECT button is engaged, the input faders flip to become the input channel contributions to that selected output.When the GEQ SELECT button is engaged, selecting an output which has a GEQ assigned, will present the GEQ on the VCA faders. Scrolling the VCA faders left or right will provide access to all 31 GEQ faders. If FADER FLIP is also engaged, the input channel faders will become the contributions to the selected mix.COLLAPSED FLIP (Hide/show unassigned channels when flipped) When in this mode, the console will only be populated with the input channels which are assigned to the selected output.
AutomationOne of the most critical requirements for theatre applications is the power and flexibility of console automation. The MIDAS PRO1 has taken into consideration these very specific requirements, and features the same automation software as the XL8, which is itself no stranger to Broadway!The PRO1’s automation system can store and recall up to 1000 snap shot scenes. These contain the audio parameter values for every control on the console as well as the network routing, configuration of the FX rack, and the format of the mixer itself, all of which is scene-specific.Hardware automation “safe” buttons are provided to enable the operator to quickly isolate selected processing areas from recall should this be required during a performance. In addition to these, the store and recall of scenes can be “scoped” such that only the areas that the operator wants to store or recall are affected (all other controls remaining in their current state).Channel settings can be edited in advance of recall (across all scenes) from the SHOW EDITOR screen, and scenes can be re-ordered, inserted and deleted, simply and quickly without overwriting their designation. Scenes can be recalled instantaneously, with no discernible drop in audio, or via complex crossfade options, including programmable surround-sound panning events.MIDI input and outputs are provided, for control of external MIDI devices, or for recalling console events from an external MIDI source. All software versions (including stored shows on a USB stick) are both forward and backward compatible i.e. a show created on one PRO1 can be loaded into a console (via a USB stick) regardless of the software version on either system. PRO1 showfiles are also compatible with all other MIDAS digital console systems.Assignable ControlsBetween the screen and the fader bank are the 8 assignable rotaries and buttons. These controls are scrolled using the vertical arrow keys, and address the function of all primary rotary and switch functions on the channels populating this area of the console. The ALT button selects the alternative function (if one is available) for each area. Assignable rotaries can be used for input gain, compressor and gate threshold, aux send levels, pan.Display screenThe high-resolution screen remains visible even in direct sunlight. In this aspect, the PRO1’s visual support is exceptional, as most conventional consoles become difficult, or impossible to operate in high ambient lighting.Visual feedback for the entire system is provided by the screen. Pressing the HOME key (just to the left of the assignable controls) instantly displays the console overview screen, which keeps all vital information (all metering, all fader positions, mutes and solos) in view at all times.
Detail panel areaThe detail panel is a vertically oriented channel strip, with an almost identical layout to the PRO2, 3, 6 and 9. The controls are configured in a logical, signal-path sequence and are easily identified by their relative positions. Both analogue users and digital adopters will find no difficulty using the large multi-colour LCD channel select buttons for navigating the console.
Input GainsThe PRO1 features two input gains per channel. First is the remote analogue gain for that wonderful MIDAS mic amp, the second is a digital gain. Set the analogue gain for the desired amount (if any) of that famous MIDAS “warmth”, then use the digital gain to trim to your preferred gain structure.
EqualizationMIDAS digital EQ features fully interpolated controls, which re-create the original phase-shift as experienced when working on the Worlds’ best-loved analogue consoles. Each input channel has 4-band parametric EQ, with a choice of four different filter types for both the high and low filters. These powerful EQ options enable the user to employ EQ filters which emulate the sound of historic MIDAS consoles, or, freed of the limitations of analogue circuitry, choose advanced digital filter types.
Dynamics ProcessingThe dynamics processing on the PRO1’s input channels is identical to the much-acclaimed MIDAS XL8. Each input channel features a frequency-conscious gate and a choice from four different compressor algorithms. Further creative expression is available, as all four compressor options feature variable knee, internal and external sidechain filtering, and colouration artefact options. Output (buss) compression offers a choice of five different options.These compression algorithms are designed to provide the engineer with a broad pallet of options for maximum creative potential, right down to the visual display on the screen changing to support the different styles. More dynamics processing options are available in the PRO1’s FX rack, including multiband compression and dynamic equalisation.FXThe PRO1’s 40 bit floating-point audio processing hosts a wide choice of virtual FX devices, which range from dual-stereo delay units, stereo modulation and many diverse reverb FX, multiband compression, dynamic EQ and multichannel dual-function dynamics processing. All FX processors are custom-designed to function within the MIDAS automatic latency compensation system. This ensures a phasecoherent sample-accurate mix regardless of whether the FX devices are used as channel inserts or on a send-and-return basis. Delay FX can be individually configured to synchronise to the PRO1’s GLOBAL TAP-TEMPO hardware button. This makes on-the-fly changes to delay effects childs’ play.Surround SoundIn addition to normal stereo and SIS operation, the PRO1 can operate in one of three surround sound modes:
All three surround modes feature divergence control to tailor the depth of the surround panning. Dynamic surround panning can be implemented using the PRO1’s trackball, or the USB pointing device of your choice.
- Quad: Four-channel L-R front plus L-R rear
- LCRS : Four-channel L-C-R plus single rear channel
- 5.1: Six-channel L-C-R plus Sub plus L-R rear
Remote ControlRemote control of the PRO1 can be achieved using an iPad and wireless access point. Install the PRO1 remote app on the iPad and connect the WAP to the PRO1’s Ethernet control port, having configured the wireless link.