Shell Pack Includes:
- 22"x18" Bass
- 12"x9" Tom
- 13"x10" Tom
- 16"x16" Floor Tom
To fully understand these drums you must accept that the desired tonal characteristics of a rack tom are completely different than that of a bass drum, and to make these drums with the same composition would result in a compromise. This is the mission behind Reference Series: To create a perfect sounding drum set where every drum is optimally engineered to produce the best sound possible within its respective tonal range and diameter... drum by drum by drum. Forget what you think you know about drums and take a closer look at Pearl's Reference Recipe and the synergy of its three task-specific components.
- “Best of Masterworks” Shell Material
- BRL Bridge Lugs w/ Swivel Function
- LB-200 Bridge FT Leg Brackets
- LG-200 Floor Tom Legs
- SP-300 Spurs
- MasterCast Die Cast Hoops
- Aluminum OptiMount Tom Holders
- Stainless Steel Tension Rods
- Molded Rubber Gaskets
- Remo Clear Emperor Tom Batters
- Remo Clear Powerstroke3 BD Batter
- Remo “Window” Snare Batter Head
- Super High Gloss
- Lacquer/Lacquer Sparkles/Ultra-Exotic Covering
- Choice of Chrome (C), Gold Plated (G), or Black Chrome Plated (B) Drum Hardware
Reference Series drums use a combination of task specific bearing edges and 3 time proven woods: Birch, Maple, and African Mahogany.
Using Maple as a sole material has long been the traditional choice for shells and for good reason. Maple provides smooth, well balanced tone that is perfect for a 12" tom. Subsequently, all Reference Series 12" toms are composed of 6 plies of Maple. The only single wood shell in the series. Our 10" and 8" toms receive 4 plies of Maple with 2 inner plies of Birch for cut and attack. And for maximum response, all 13" and smaller toms have a rounded 45° bearing edge.
Beginning with our 13" tom and larger, Mahogany is added to the inner plies to increase the lower frequencies and accentuate the warmth of the Maple. The 14" toms and larger begin using our fully rounded bearing edge for even more shell contact. Our 18" and 20" bass drums use 4 inner plies of Mahogany with 2 outer plies of Maple. As the size of the bass drums increase, so does the amount of Mahogany. Our 22" and 24" bass drums incorporate an amazing 6 inner plies of Mahogany surrounded by 2 outer plies of Maple for the ultimate in solid responsive bass frequencies.
With Reference Series, it’s not about compromise, it’s about every drum in your kit performing at its optimal capacity.Snares:
6 inner plies of Birch unite with 14 outer plies of Maple for a staggeringly thick 20 ply shell. The 45 degree bearing edge brings all 20 plies to the party in a highly focused sweet spot. This projects the volume that you would expect from such a thick shell without losing sensitivity or articulation. The state-of-the-art in modern hardware adorns these snares to maximize every nuance of the shell construction.
The 45 degree bearing edge on Reference snare shells brings all 20 plies into play by promoting a tightly focused shell contact area for extreme sensitivity and maximum volume. The six inner plies of Birch provide a resilient crack, which is balanced and warmed by the 14 outer plies of Maple. The ultimate balance of power, projection and resonance, Reference Snare Drums are unlike anything you have ever experienced.Drum Hardware:
The Perfect Compliment to a Great Set of Drums
The same tireless pursuit of perfection that goes into our legendary drums is found in our hardware. Hardware designed to maximize the sound of your drums. Pearl Hardware has set the standard for strength, durability and innovation. It’s the choice of working professionals who depend on their equipment. Surefooted on stage or in the studio, when the show must go on, count on Pearl hardware.Lug Design
Bridge style lugs and floor tom brackets provide maximum resonance with minimal shell contact. Pearl’s revolutionary BRL lugs assure the ultimate in head seating and tuning integrity. The unique swivel function allows the tension rods to align perfectly into the lugs so there’s no lateral pressure against the hoops, thus assuring maximum resonance and sustain. Bass Drum Claw Hook
Our bass drum claws incorporate rubber hoop isolators for scratch prevention on lacquered hoops, provide evenly distributed clamping force for consistent tuning. The key bolts are recessed for snag-free fit in carrying cases and to eliminate accidental detuning.Floor Tom Leg Brackets
Air Suspension Rubber Tips
Full height adjustment with our built in memory lock keeps floor tom positioning perfectly set. Our patented Air Suspension Rubber Tip allows your floor tom to rest on a cushion of air. These large rubber feet prevents premature sound decay from floor contact. Floor toms never had it so good. OptiMount Suspension System
The OptiMount Suspension System provides tom mounting with zero shell contact for ultimate resonance. By attaching to the tension bolts via isolated rubber bushings the shell is allow to float which in turn allows it to sing to its fullest capabilities.MasterCast Die-Cast Hoop
Our die cast hoops offer state-of-the-art head seating and tuning capabilities thanks to their structural strength and precision manufacturing technique. The MasterCast Hoop system prevents binding and allows the shell to resonate to its absolute fullest potential. Bass Drum Spur
Our telescoping spurs feature rubber or spike tips for maximum traction control. The high-grip rubber tip can be retracted to allow a recessed spike to be exposed for maximum “bite” on carpeted surfaces.Stainless Steel Tension Bolts
Pearl’s stainless steel tension rods are machined from a single piece of stainless steel to the most exacting tolerances in the industry. They feature super smooth and precise tensioning with absolutely no play. Each is matched with a precision-machined brass swivel nut for ultra-precise performance.