BAE 1023 Mic Pre/EQ Pair w/PSU (Blue)
$6,895.00
3 Band Class A Mic Pre EQ. Expanded Frequencies. Fully selectable with High Pass filter. DI, Output Fader, 48V Phantom. w/ 24V PSU and cable
Please check with us about availability
Description
BAE 1023 Mic Pre/EQ Pair w/PSU (Blue)
The BAE 1023 Mic Pre/EQ Pair w/PSU (Blue) is completely handwired using Carnhill (St. Ives) transformers. It has the exact same mic/line preamp as the 1073, but with significantly more frequencies in the mid and high sections.
Aside from simply offering more frequency settings to play with, these expanded EQ sections of BAE 1023 Mic Pre/EQ Pair w/PSU (Blue) also allow you to play the mid bell curve directly against the high and low shelves where they overlap. This capability opens the tone shaping possibilities in very interesting and musical ways.
Features:
– High Frequency: +/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz.
– Low Frequency: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz.
– Mid Range: +/-12dB or +/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz.
– High Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz & 360Hz.
– EQ Button: Switches the equaliser on or off
– Phase Button: 180°
To know more about BAE Audio, Click Here
Additional information
| Weight | 23 lbs |
|---|---|
| Brand | BAE |
| Condition | New |
Technical Specifications
3 Band Equaliser
- HF: +/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz
- LF: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
- MF: +/-18dB +/-12dB or +/-18dB peaking with switchable selectable centre frequencies of - - - - 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz - High Pass Filter: 18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz & 300Hz
- Mic Input Impedance: ≈1200/300 ohms
- Line Input Impedance: 10k ohms
- DI Input Impedance: ≈150k ohms
- Output Impedance: 65 ohms
- Common Mode Rejection Ratio: 100dB min @ 60Hz
- Maximum Output Level: +27.4 dBu @ 600Ω
- Power Requirements: 115/230 VAC, 28W
- Gain dB: 0 to 80 dB
- Equivalent Input Noise: -110 dBu; Unweighted 300kHz Bandwidth
- Weight (Module/Rackmount): 6 LBS/2.72 KG 10 LBS/4.54 KG
- Dimensions in Inches (Module/Rackmount): 45 mm W x 8.75 inches H x 10.5 inches D 19W x 1.75L x 9D
Download Recall Sheet for BAE 1023 Mic Pre/EQ (Blue)(Pair)
Related products
Pre/EQ/Compressor/Line Driver Channel Strip, features API 512c Mic Preamplifier, API 550A Equalizer, API 527 Compressor, API 325 Line Driver, Complete patching facilities on rear panel, Two ten segment LED VU displays, Output clips at +30dBm.
The BAE 1073 is as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.
3 Band Class A Mic Pre EQ. Expanded Frequencies. Fully selectable with High/Lo Pass filter. DI, Output Fader, 48V Phantom. Blue requires PSU
Channel Strip Mono Class-A Microphone PreAmp with 4-Band Fully Parametric Equalizer with PSU
3 Band Class A Mic Pre EQ. Expanded Frequencies. Fully selectable with High Pass filter. DI, Output Fader, 48V Phantom. Blue Requires PSU
3 Band Class A Mic Pre EQ. Fully selectable with High Pass filter. DI, Output Fader, 48V Phantom
3 Band Class A Mic Pre EQ. 12K High with High Pass filter. DI, Output Fader, 48V Phantom. Blue. With 24V PSU and cable
You have not viewed any products yet.