dBTechnologies DVA-M2M DVA-M2S Array Module

dBTechnologies DVA-M2M DVA-M2S Array Module offers the same user-friendliness and sound quality of its DVA predecessors, this 2-Way Active Line Array System sets the new benchmark for high-end sound performance thanks to the innovative Master+Slave design which aacks high SPL in incredibly small dimensions and weight. A super versatile system for both portable and permanent installation solutions.

Each unit of DVA MINI system is comprised of two line array modules, each with two 6.5” neodymium woofers and two 1” high-frequency compression drivers. The M2M module is the master module that contains the 400-watt Digipro G3 amplifier that power both the M2M and M2S slave module. The system achieves 126 dB max SPL per unit. Constructed in solid Polipropilene reinforced with an internal anti-vibration structure, DVA MINI features a new fast-lock mechanic design: users simply place one module below the other and slide it towards one side until it locks in place. Moreover, every DVA MINI module has a back mechanic with incremental steps allowing different line array positioning angles.

For more info about dBTechnologies, visit: http://www.dbtechnologies.com

View more products from dBTechnologies

• Speaker Type M2M: 2-Way Active Master Line Array Module
• Speaker Type M2S: 2-Way Slave Line Array Module

Acoustical data:

• Frequency Response [-6dB]: 78 - 19.000 Hz
• Frequency Response [-10dB]: 68 - 20.000 Hz
• Max SPL: 126 dB per unit
• HF: 2x1"
• Type HF: Neodymium
• Voice Coil HF: 1"
• LF: 2x6.5"
• Type LF: Neodymium
• Voice Coil LF: 1.5"
• Directivity: 90x15°

Amplifier:

• Amp Technology: Digipro® G3
• Amp Class: Class D
• RMS Power HF Amp: 200 W (100 W + 100 W)
• RMS Power LF Amp: 200 W (100 W + 100 W)
• Cooling: Convection

Processor:

• Controller: DSP 56 bit
• AD/DA Converter: 24 bit/48 kHz
• System Presets: 9 presets (8x HF and Low-Mid corrections and 1x for service use)
• Limiter: Multiband, RMS/Peak, Thermal
• Crossover Frequency LF-HF: 1800 Hz
• Slope LF-HF: 24 dB/Octave

Input

• Signal Input: 1x XLR fem, Bal.
• Signal Output: 1x XLR male, Bal.
• Power Supply: 400W SMPS with PSU Auto-range (110V~ and 220V~)
• Power Socket: 1x PowerCon In 1x PowerCon Out
• Signal Input M2S: 1 Custom connector

Mechanics

• Housing: Polypropylen PP
• Handles: 2x back side
• Fittings: Integrated hardware with fast lock mechanics
• Splay Angles: 0°- 1,5°- 3°- 4,5° - 6°- 8°- 10°- 12,5°- 15°
• Width: 460 mm (18.1 in)
• Height: 190 mm (7.5 in)
• Depth: 345 mm (13.6 in)
• Weight M2M: 7.6 kg (16.8 lbs)
• Weight M2S: 7.1 kg (15.7 lbs)