dBTechnologies RDNET Control 2 USB Controller
$599.00
RDNET CONTROL 2 is an hardware interface to connect dB Technologies RDNET compatible devices (DVA T12,T8, DVA S30N,etc.), to a Personal Computer (PC) by means of an USB connection.
Please check with us about availability
Description
dBTechnologies RDNET Control 2 USB Controller
The dBTechnologies RDNET Control 2 USB Controller is a hardware interface to connect dB Technologies RDNET compatible devices (DVA T12,T8, DVA S30N,etc.), to a Personal Computer (PC) by means of a USB connection.
The RDNET system was purposely developed to create a data network for monitoring and command of more systems. The RDNET CONTROL 2 unit can manage up to 2 subnets. Up to 32 devices can be connected to each subnet (2 subnets x 32 = total 64 devices).
The addressing of the various devices is handled automatically by RDNET CONTROL 2 interface. Each device is assigned a unique address during the power on procedure of network.
To learn more about dBTechnologies, Click Here
Additional information
| Brand | dBTechnologies |
|---|---|
| Condition | New |
Technical Specifications
Related products
control and monitoring network in between Ethernet (remote control) / USB (direct control) and RDNet
RDNET CONTROL 8 is an hardware interface to connect dB Technologies RDNET compatible devices (DVA T12,T8, DVA S30N,etc.), to a Personal Computer (PC) by means of an USB connection.
470-870 MHZ Continuous Working Range With No Band Switch, More Than 16000 Frequencies Available, Digitally Encripted Audio, ETSI And FCC Compliant, Remote Monitoring And Control, Highly Resistant To Interferencies, Updatable Via USB
1500w Rms Digipro Class-d Amplifiers, State-of-the-art Neodymium Transducers, Rotatable Frontal Panel, Double Eq Preset On-board, Input And Output Panels On Both Sides, Smps With Active PFC
Variable crossover frequencies, Precise limiter functions, On board delay for perfect time alignment, Preset for configuring cardiod systems, Settings accessible via rotary encoder, X-over out, RDnet network port
40-bit floating point processing DSP and 48 kHz 24-bit HI-Q Analogue/Digital Conversion, dynamic range > 112 dB. 8 universal inputs (48V), 6 outputs - 4 Euroblocks bal., 2 RCA plugs, 10 programmable logic inputs (GPI), 6 programmable logic outputs (GPO), 2 of which supported by relay. Configurable parametric EQs, gates, compressors, limiters, delays, priority levels, automatic gain control, levels, gains on in-out and cross points, auto-mixer operations, filters. Each unit can work as dual-room combiner with independent auto-mixer facility for each room. Configurable ALC (Automatic Level Control) facility by using Input 8 to connect a noise detection microphone. The control is then assignable to any output or group of outputs. USB connectivity for device configuration. RDNet Networked Control
hardware interface to connect RCF RDNet compatible devices (TTL55-A, TTL33-A II, TTL31-A II, etc.) to a Personal Computer
You have not viewed any products yet.