dBTechnologies SUB-28D Active Subwoofer
Active Subwoofer 2×8″ 800 Watt, two 8“ woofers driven by a 800W digital power amp and an onboard digital stereo x-over.
This product has been discontinued.
Description
dBTechnologies SUB-28D Active Subwoofer
We engineered the dBTechnologies SUB-28D Active Subwoofer to provide low-end reinforcement for compact satellites such as dBTechnologies L and K Series speakers, Active Subwoofer 2×8″ 800 Watt.
This light and lean enclosure houses two 8“ woofers driven by a 800W digital power amp and an onboard digital stereo x-over.
Setting up mono and stereo satellite systems is a piece of cake with this amp and
DSP on board.
For more info about dBTechnologies, visit: http://www.dbtechnologies.com
Additional information
| Brand | dBTechnologies |
|---|---|
| Condition | New |
Technical Specifications
- Speaker Type: Active Bandpass Subwoofer
Acoustical data
- Frequency Response [-10dB]: 45 - 150 Hz
- Max SPL: 125 dB
- Directivity: omnidirectional
- LF: 2x8 "
Amplifier
- Amp Technology: Digipack™
- Amp Class: Class D
- Peak Power: 800 W
Processor
- Controller: DSP 24 bit/ 48 kHz
- Phase: 0, 180 °
- Limiter: Dual Active Limiter
- Crossover Frequency MF-HF: 100 Hz, 24dB/Octave
- System Presets: Flat, Boost
Input
- Signal Input: 2x XLR
- Signal Output: 2x XLR X-Over Out/ Link Out
Mechanics
- Housing: Multiplex with H.E.T coating, reinforced
- Width: 290 mm (11.6 in)
- Height: 520 mm (20.8 in)
- Depth: 505 mm (20.2 in)
- Weight: 19.5 kg (42.99 lbs)
Download Datasheet for dBTechnologies SUB-28D Active Subwoofer
Related products
Variable crossover frequencies, Precise limiter functions, On board delay for perfect time alignment, Preset for configuring cardiod systems, Settings accessible via rotary encoder, X-over out
600 W RMS Class D AMP, Selectable Stereo Balanced Input, Link or Xover Balanced Stereo Output Mode, Compact and sturdy wood cabinet, Lightweight,m Polarity Switch, Flat or boost mode switch
Can be easily combined with DVX passive full-range speakers by using an external crossover, four handles (two on each side) for easy transport, the predisposition for wheels on the bottom, a couple of standard M20 pole mount plates and recesses on top and on one side of the box.
Designed for optimized acoustic and mechanical compatibility with vio L210, New acoustic design featuring all-in-one phase plug and hf horn front panel, Low-latency processing thanks to powerful dsp with linear-phase fir filters, Fully compliance with aurora net remote control software, DSP presets for maximum acoustic customization, Built-in flying hardware allowing fast & easy set up and flying operations
A compact PA system (together with DVA K5 on a speaker pole) or ground-stacked, but can also be flown thanks to the optionally available flyware. A dedicated encoder allows to apply up to 4.5 ms of delay, with 0.5 ms steps. A switch allows to invert the phase by 180° as well as changing the LPF from 90 Hz to 120 Hz.
3-way active line array system, 3200W RMS digipro G4 AMP technology, Full range smps with pfc, Horn-loaded midrange for improved acoustic efficiency and coverage accuracy, Exclusively designed waveguide for maximum hf directivity control
Variable crossover frequencies, Precise limiter functions, On board delay for perfect time alignment, Preset for configuring cardiod systems, Settings accessible via rotary encoder, X-over out
Active bass reflex subwoofer flyable, Integrated hardware with innovative quick-lock mechanics lightweight, 700w rms digipro® G3 class-d amplifier, Switched mode power supply with auto-range, Digital controller on board, Dual function feet
You have not viewed any products yet.