Dynaudio M3VE (Pair) 3-Way Passive Monitors with 3 Way X-Over

For Mastering, Tracking and Mixing. Bi-amped / passive crossover between mid and high. The Professional Dynaudio M3VE monitor system that takes monitoring to a whole new level with a significant upgrade from its predecessor – the renowned M3A 3-way monitor.that takes monitoring to a whole new level with a significant upgrade from its predecessor – the renowned M3A 3-way monitor.

With Dynaudio ESOTAR² driver technology, M3VE takes over where most other monitor systems give up. Attention to detail, underpinned by a 22Hz – 21kHz frequency response and beyond 133dB SPL, M3VE leaves no room for desire in terms of resolution, range or power.

Features:

• Three-Way Main Monitor
• Handcrafted drivers
• For in-wall or free standing setups
• Passive MF/HF crossover

To learn more about Dynaudio, Click Here

View more products from Dynaudio

• System: 3-way Active Main Monitor
• Frequency Response (±3dB): 22Hz - 21kHz
• Peak SPL 1m, pair (IEC Short Term): > 133dB peak
• Amplifier minimum: 2 x Lab.gruppen PLM10000Q
• Resonance Frequency: 24Hz
• Internal Cabinet Volume: 145 liters
• Bass Principle: Bass reflex
• Amplifier: 1/2 Lab-gruppen PLM10000Q (2 channels pr speaker). Preset: M3VE V05
• Tweeter:
• Esotar² 28 mm soft dome Magnetic fluid,
• Metal rear chamber, Pure alu wire voice
• coil, 4 mm die-cast alu front, Neodym
• magnet material
• Midranges:
• 15 cm with 75 mm diameter pure aluminum
• wire voice coil, one-piece molded MSP cone
• Woofer:
• Esotar 30 cm with 75 mm diameter pure
• copper wire voice-coil, MSP-cone, long stroke
• Weight: 65 kg
• Dimensions (WxHxL): 555 x 775 x 505 mm
• Cabinet:
• 25mm MDF, strategically braced and
• damped. Low turbulence reflex-ports.
• Separate chambers for each woofer.
• Crossover:
• Woofers/hightone: active dsp-based, in-
• amp Lake processor. Midrange/tweeter:
• passive wir air-coils only, low dielectrium
• capacitors and zero-compression resistors.
• Model: 12k44
• Number of amplifier channels: 4
• Max out Power per Channel (4 ohms, all channels driven): 3000W
• THD + N at 1kHz and 1dB below clipping: < 0.04 %
• Dynamic Range: > 114dB
• Channel separation (Crosstalk) at 1 kHz: > 70dB
• Inputs: Analog, AES/EBU & Dante
• Analog Input Sample Rate / Resolution: 96kHz / 24bit
• Weight: 16.5kg (36lbs)
• Dimensions (W x H x D): 483 (19") x 88 (2 U) x 424(16")