Focal Alpha 65 Evo 6.5 inch Powered Studio Monitor
$399.00
Alpha 65 Evo has a 1″ (25mm) aluminium tweeter and a 6.5″ (16.5 cm) woofer with Slatefiber cone developed and manufactured in Focal’s workshops in France.
Description
Focal Alpha 65 Evo 6.5 inch Powered Studio Monitor
Alpha 65 Evo has a 1″ (25mm) aluminium tweeter and a 6.5″ (16.5 cm) woofer with Slatefiber cone developed and manufactured in Focal’s workshops in France. This monitor features excellent dynamics and neutrality in its tonal balance. Its technologies mean that Alpha 65 Evo can guarantee excellent sonic coherence wherever you are listening.
Its features include a 1/4″ (6.35mm) TRS jack input in addition to the XLR and RCA analogue inputs. There is also a disengageable automatic stand-by mode as well as inserts for wall and ceiling fastening.
The high current capacity offered by its 2 amplifiers supports total control of the signal dynamics. This also allows high volumes to be reached without distortion.
The bass-reflex design, rounded edges and modern, robust side panels are another big plus for the Alpha 65 Evo, all contributing to acoustical integration and optimum aesthetics in any location.
Features:
- Excellent dynamics
- Wide dispersion, even sound retained throughout the room
- 6.5″(16.5 cm) Slatefiber cone woofer
- Large laminar vent
- Identical tonal balance at both low and high volume
- Detailed mixes
- Connect up to 3 audio sources
- Inserts for wall and ceiling fastening
- Automatic disengageable stand-by
- Protection grilles included
To learn more about Focal Audio, Click Here
View more products from Focal Audio
Additional information
| Condition | New |
|---|---|
| Brand | Focal |
Technical Specification
- Type: Alpha 65 Evo Monitoring
- Frequency response (+/- 3dB): 40Hz - 22kHz
- Maximum SPL: 104dB SPL (peak @ 1m)
- Inputs Connectors:
- TRS: symmetrical 10kOhms
- XLR: symmetrical 10kOhms
- RCA: asymmetrical 10kOhms with compensated sensitivity
- Medium and low frequency amplifier: 55W
- High frequency amplifier: 30W
- Automatic stand-by mode: After around 15 minutes of no use By signal detection >6mV
- Power supply: 100 - 240V~(T2AL fuse/250V)
- Connection: IEC socket and detachable power cable
- Sensitivity: Adjustable, 0 or +6dB
- Level Midrange/bass(0 - 250Hz): Adjustable, +/-6dB
- Treble level (4.5 - 35kHz): Adjustable, +/-3dB
- Power on/off: On/off switch on the rear panel
- Stand-by consumption: < 0.5W
- Views and controls: On and off LED - Stand-by LED
- Woofer: 6.5" (16.5cm)Slatefiber cone
- Tweeter: 25mm (1") with aluminium inverted dome
- Construction: 0.6" (15mm) MDF
- Finish: Black vinyl and paint
- Dimensions with 4 rubber feet (HxWxD): 13.35x10.28x11.38"(339x261x289mm)
- Weight: 16.8lbs (7.6kg)
Related products
Three-way Tri-Amplified system, which includes the Ocean Way tonal balance equalization system and electronic crossover.
2-way Active Main Studio Monitor with 250W 1" HF, 250W 8" LF Drivers; Hybrid Horn/Waveguide System; and 500W Bi-amplification (each)
Three-way Tri-Amplified system, which includes the Ocean Way tonal balance equalization system and electronic crossover.
Monitor Controller with 4 Inputs, Ouputs for 3 Sets of Speakers, Sub Out, Talkback Mic, 2 Headphone Outs, and Individual Level Controls
A portable and robust 2x2 Dante audio interface featuring 2 Red Evolution mic pres, stereo line out & a stereo headphone amplifier.
Active Near/Midfield Monitor with 125W 8" LF, 125W 1" HF Drivers and Time-aligned Cabinet with Rear-panel Room Response Controls (each)
Stereo Headphone And Line Output, PoE Supplied for any Dante audio-over-IP network.
100W 5.25" Bi-Amped Active Nearfield Monitor
You have not viewed any products yet.