Focusrite RedNet HD32R

32×32 Pro Tools | HD I/O With Dual PSUs

RedNet HD32R is a 1U, Pro Tools | HD interface for any Dante audio-over-IP network, providing up to 32×32 channels of I/O (16×16 at 192kHz) Featuring network and power supply redundancy, RedNet HD32R is the ideal choice for integrating your Pro Tools HD system into a Dante networked I/O environment in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.

A pair of DigiLink mini connectors allows RedNet HD32R to connect directly to any Pro Tools | HD system whether it’s Native, HDX or even a legacy TDM system. Multiple RedNet HD32R units can be on the same Pro Tools system up to the maximum I/O channel count of Pro Tools, and Loop Sync I/O allows seamless integration with other Pro Tools interfaces such as HD I/O and Sync HD I/O.

Key Features:

• 32×32 Pro Tools | HD I/O for Dante audio-over-IP networks at up to 96kHz (16×16 at 192kHz)
• Up to 24-bit, 192kHz sampling rates
• Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
• Comprehensive remote control and remote signal metering through RedNet Control
• Primary and Expansion DigiLink mini connections
• AES67 compliant
• Word Clock and Loop Sync I/O for increased flexibility and integration with other Pro Tools | HD hardware
• Brainworx bx_console Focusrite – exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equaliser and ISA 130 Dynamics Modules

To learn more about Focusrite Audio, Click Here

View more products from Focusrite

Digital Performance

• Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit
• Clock Sources: Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master
• External Word Clock Range: Nominal sample rate ±7.5
• Channel Count: 32x32 at up to 96kHz sampling rate, 16x16 at 176.4 and 192kHz

Rear Panel Connectivity

• Primary Port: 1 x Mini DigiLink
• Expansion Port: 1 x Mini DigiLink
• Word Clock Input: 1 x BNC 75O port (switchable termination)
• Word Clock Output: 1 x BNC 75O port
• PSU: 2 x IEC Inputs with retaining clips
• Network: 2 x etherCON NE8FBH-S, also compatible with standard RJ45 connectors

Front Panel Indicators

• Primary PSU (A): Green LED. Illuminates when an AC input is applied and all DC outputs are present
• Primary PSU (B): Green LED. Illuminates when an AC input is applied and all DC outputs are present
• Primary Network: Green LED. Indicates that a network connection is present on primary port when in redundant mode
• Secondary Network: Green LED. Indicates that a network connection is present on secondary port when in redundant mode
• Network Locked: Green LED. When unit is network slave, shows valid network lock. When unit is network master
• Sample Rate: Orange LED for each: 44.1 kHz, 48 kHz, x2, x4
• Pull Up/Down: Orange LED. Indicates unit is set to operate on a Dante pull up/down domain
• Signal Indicators: 16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS
• Clock Source: Orange LED for each: Internal, Word Clock, Loop Sync and DAW Master

Network Modes

• Redundant: Allows unit to connect two independent networks
• Switched: Connects both ports to integrated network switch allowing daisy-chaining of device

Dimensions

• Height: 44.5mm/ 1.75"
• Width: 482.6mm/ 19"
• Depth: 263mm/ 10.35"

Weight

• Weight: 3.9kg

Power

• Power PSU: 2 x Internal, 100-240V, 50/60Hz, consumption 30VA

Heat Performance

• Operating Temperature: Operates at up to an ambient temperature of 50 degrees Celcius