Martin MAC Aura XB
The MAC Aura XB takes an award-winning, innovative, compact LED wash light to the next level, incorporating many new features first introduced with the MAC Quantum Wash. Not only does the MAC Aura XB offer additional brightness, it also features a new superior color mixing system and an optimized lens design for tighter beams and more even washes. Martin’s unique and patented Eye-candy Aura Effect is also part of the package.
Features:
– Super-bright single-lens wash with fully premixed color
– Broad color palette, RGBW color mixing
– Eye-candy Aura Effect™
– Uniform shades
– Built-in FX engine
– 10 to 60° uniform zoom
– 6000 Lumens output
– Rapid movement
– Compact, low weight design (6.5 kg)
– High efficiency, low power consumption, long lifetime
Specifications:
Physical:
– Length (across yoke): 302 mm (11.9 in.)
– Width (across yoke): 302 mm (11.9 in.)
– Height (head straight up): 360 mm (14.2 in.)
– Weight (without accessories): 6.5 kg (14.4 lbs.)
Dynamic Effects:
– Beam color mixing: RGBW
– Aura (secondary lens array illumination) color mixing: RGB
– Beam color temperature control: CTO, variable 10 000 – 2500 K
– Beam and aura electronic ‘color wheel’ effect: 33 LEE-referenced colors plus white, – variable-speed color-wheel rotation effect and random color
– Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
– Pre-programmed effects: Range of independent and synchronized Beam and Aura FX, two combinable Electronic dimming: Independent beam and aura, four dimming curve options
– Zoom: 10° – 60° (one-tenth peak angle)
– Pan: 540°
– Tilt: 232°
– Pan and tilt speed: Adjustable via onboard control panel and DMX
Control and Programming:
– Control options: Independent or synchronized Beam and Aura control
– Control system: DMX, RDM
– Control resolution: 8-bit, with 16-bit control of pan & tilt
– DMX channels: 14/25
– Setting and addressing: Control panel with backlit graphic display
– DMX compliance: USITT DMX512-A
– RDM compliance: ANSI/ESTA E1.20
– Transceiver: RS-485
– Firmware update: Via DMX with Martin™ USB Duo DMX Interface Box
Optics and Photometric Data:
– Light source: 19x 15W RGBW LED Array System
– LED refresh rate: Beam 1200 Hz, Aura 4395 Hz
– Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
– Total luminous output (wide, one-tenth peak): 6000 lumens
– Total luminous output (narrow, one-tenth peak): 4300 lumens
– Video compatibility: Designed for use with HD/high-speed video cameras
– *Figure obtained under manufacturer´s test conditions
Construction:
– Color: Black
– Housing: High-impact thermoplastic, flame-retardant to UL 94 5VA
– Protection rating: IP20
Installation:
– Mounting points: M12 hole for rigging clamp, attachment points for surface-mounting bracket
– Orientation: Any
– Minimum distance to combustible materials: 200 mm (8 in.) from fixture
– Minimum distance to illuminated surfaces: 1 m (3 ft. 4 in.) from fixture
– Location: Indoor use only, must be fastened to surface or structure
Connections:
– AC power: Neutrik PowerCON TRUE1 NAC3PX dual socket
– AC power input socket: Accepts Neutrik PowerCON TRUE1 NAC3FX-W cable connector
– AC power thru socket: Accepts Neutrik PowerCON TRUE1 NAC3MX-W cable connector
– DMX data in/out: 5-pin locking XLR
Electrical:
– Maximum power consumption: 400 W
– Power supply unit: Auto-ranging electronic switch mode
– AC power: 100-240 V nominal, 50/60 Hz
– Typical half-cycle RMS inrush current: 10.7 A
– Power consumption, all effects static, zero light output: <25 W
Typical Power and Current:
– 100 V, 60 Hz: 359 W, 3.8 A, PF 0.99
– 120 V, 60 Hz: 355 W, 3.2 A, PF 0.99
– 208 V, 60 Hz: 350 W, 1.8 A, PF 0.97
– 230 V, 50 Hz: 349 W, 1.7 A, PF 0.95
– 240 V, 50 Hz: 349 W, 1.6 A, PF 0.95
– Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of /- 10%.
Thermal:
– Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
– Maximum ambient temperature (Ta max.): 40° C (104° F)
– Minimum ambient temperature (Ta min.): 5° C (41° F)
– Total heat dissipation (calculated, /- 10%): 1230 BTU/hr.
Approvals:
– EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
– EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547
– US safety: UL 1573
– US EMC: FCC Part 15 Class A
– Canadian safety: CSA E598-2-17 (CSA E60598-1)
– Canadian EMC: ICES-003 Class A
– Australia/NZ: C-TICK N4241
Included Items:
– M12 bolt suitable for use with Martin rigging clamps
– Note that power cables and connectors are not included and must be ordered separately