Martin MAC Aura

The MAC Aura is an award-winning wash light that lighting designers have turned to the world over due to its versatility as a powerful beam and wash luminaire of the highest caliber. The result of out-of-the-box creative thinking, it is the first LED moving head wash light to combine multicolor beam LEDs with a backlight LED array that takes the synthetic look out of LED wash lights.

Features:

– Single-lens wash with fully premixed color
– Broad color palette, RGBW color mixing
– Eye-candy Aura Effects
– Uniform shades
– Built-in FX engine
– 11 to 58° zoom
– 3850 Lumens output
– Rapid movement
– Compact, low weight design (5.6 kg)
– High efficiency, low power consumption, long lifetime

Specifications:

Physical:

– Length: 302 mm (11.9 in.) across yoke
– Width: 302 mm (11.9 in.) across yoke
– Height: 360 mm (14.2 in.), head straight up
– Weight: 5.6 kg (12.4 lbs.) without accessories

Dynamic Effects:

– Beam color mixing: RGBW
– Aura (secondary lens array illumination) color mixing: RGB
– Beam color temperature control: CTO, variable 10 000 – 2500 K
– Beam and aura electronic ‘color wheel’ effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
– Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
– Pre-programmed effects: Range of synchronized and independent beam and aura FX, different FX can be combined
– Electronic dimming: Independent beam and aura, four dimming curve options
– Pan: 540°
– Tilt: 232°
– Pan and tilt speed: Adjustable via onboard control panel and DMX

Control and Programming:

– Control options: Independent control of beam (primary output) and aura (secondary lens array illumination)
– Macro programs selectable via DMX: Synchronized beam and aura effects
– Control: DMX
– RDM: Implemented
– Control resolution: 8-bit, with 16-bit control of pan & tilt
– DMX channels: 14/25
– Setting and addressing: Control panel with backlit graphic display
– DMX compliance: USITT DMX512-A
– RDM compliance: ANSI/ESTA E1.20
– Transceiver: RS-485
– Fixture software update: Via DMX with Martin™ USB Duo DMX Interface Box

Optics:

– Zoom range: 11° – 58°
– One-tenth peak angle
– Light source: 19x 10W RGBW LED Array System
– LED refresh rate: Beam 1220 Hz, Aura 4395 Hz
– Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
– *Figure obtained under manufacturer´s test conditions

Photometric Data:

– Total output: 3850 lumens (zoom at maximum)

Construction:

– Color: Black
– Housing: High-impact flame-retardant thermoplastic
– Protection rating: IP20

Installation:

– Mounting points: One M12 threaded hole for rigging clamp
– Location: Indoor use only, must be fastened to surface or structure
– Orientation: Any
– Minimum distance to combustible materials: 100 mm (4.0 in.)
– Minimum distance to illuminated surfaces: 200 mm (7.9 in.)

Connections:

– AC power input: Neutrik PowerCon
– AC power throughput: Neutrik PowerCon
– DMX and RDM data in/out: 5-pin locking XLR

Electrical:

– AC power: 100-240 V nominal, 50/60 Hz
– Maximum total power consumption: 260 W
– Power supply unit: Auto-ranging electronic switch mode
– Main fuse: 5 AT (slow blow)
– Typical power consumption, all effects static, zero light output: <15 W

Typical Power and Current:

– 100 V, 60 Hz: 236 W, 2.4 A, PF 0.994
– 120 V, 60 Hz: 234 W, 2.0 A, PF 0.992
– 208 V, 60 Hz: 229 W, 1.2 A, PF 0.970
– 230 V, 50 Hz: 228 W, 1.1 A, PF 0.959
– 240 V, 50 Hz: 228 W, 1.0 A, PF 0.953
– Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of /- 10%.

Thermal:

– Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
– Maximum ambient temperature (Ta max.): 40° C (104° F)
– Minimum ambient temperature (Ta min.): 5° C (41° F)
– Total heat dissipation (calculated, /- 10%): 880 BTU/hr.

Approvals:

– EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
– EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547
– US safety: UL 1573
– US EMC: FCC Part 15 Class A
– Canadian safety: CSA E598-2-17 (CSA E60598-1)
– Canadian EMC: ICES-003 Class A
– Australia/NZ: C-TICK N4241

Included Items:

– M12 bolt suitable for use with Martin rigging clamps
– User manual: P/N 35000254