Martin MAC Quantum Profile

This extremely bright LED profile fixture combines top-quality white light with a fast, smooth CMY color mixing system and crisp gobo projection on surfaces as well as mid-air.

With all this and the new Animotion™ FX system that allows never-before seen beam animations, the market is now finally seeing the first real 700/800 W discharge lamp replacement in a profile fixture that effectively harnesses cutting-edge LED technology.

Features:

– First real alternative to a 700/800 watt HID fixture
– Flat field, crisp image, high contrast
– Full feature set including CMY color mixing and 1:3 zoom
– Very low weight and compact design
– Super high-speed movements and effects
– Consistent photometric performance via latest LED technology

Specifications:

Physical:

– Length: 452 mm (17.8 in.)
– Width (across yoke): 431 mm (17.0 in.)
– Height (head straight up): 642 mm (25.3 in.)
– Height (maximum): 648 mm (25.5 in.)
– Weight: 23.2 kg (51.1 lbs.)

Dynamic Effects:

– Color mixing: CMY, independently variable 0 – 100%
– Color wheel: 6 color filters plus open
– Rotating gobo wheel: 6 interchangeable gobos plus open, wheel rotation, gobo rotation, indexing and shake
– Static gobo wheel: 10 gobos plus open, wheel indexing, rotation and shake
– Beam effects: Rotating three-facet prism
– Zoom: Motorized
– Focus: Motorized, with zoom-focus tracking
– Iris: 0 – 100%, pulse effects
– Shutter effect: Electronic, with variable speed regular and random strobe
– Electronic dimming: Four dimming curve options
– Pan: 540°
– Tilt: 268°
– Pan and tilt speed: Adjustable via onboard control panel and DMX

Control and Programming:

– Control system: DMX
– RDM: Implemented
– Control resolution: 8-bit, with 16-bit control of dimming, gobo indexing, zoom, focus, pan and tilt
– DMX channels: 19/27
– Setting and addressing: Control panel with backlit graphic display
– DMX compliance: USITT DMX512-A
– RDM compliance: ANSI/ESTA E1.20
– Transceiver: RS-485
– Fixture software update: Direct using USB memory stick or via DMX link using Martin USB Duo™ – DMX Interface Box

Optics:

– Light source: 475 W LED engine
– LED refresh rate: 3000 Hz
– Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
– Zoom range: 12° – 36° (1:3)
– Output: 12 700 lumens
– *Figure obtained under manufacturer´s test conditions

Construction:

– Color: Black
– Housing: High-impact flame-retardant thermoplastic
– Protection rating: IP20

Installation:

– Mounting points: 4 pairs of quarter-turn locks
– Location: Indoor use only, must be fastened to surface or structure
– Orientation: Any
– Minimum distance to combustible materials: 0.2 m
– Minimum distance to illuminated surfaces: 2.0 m

Connections:

– AC power input: Neutrik PowerCon
– DMX and RDM data in/out: 5-pin locking XLR

Electrical:

– AC power: 120-240 V nominal, 50/60 Hz
– Power supply unit: Auto-ranging electronic switch mode
– Maximum total power consumption: 750 W
– Typical power consumption, all effects static, zero light output: Approx. 50 W
– Typical half-cycle RMS inrush current: 10.3 A

Typical Power and Current:

– 120 V, 60 Hz: 4.8 A, 576 W, PF 0.999
– 208 V, 60 Hz: 2.8 A, 568 W, PF 0.991
– 230 V, 50 Hz: 2.5 A, 565 W, PF 0.988
– 240 V, 50 Hz: 2.4 A, 565 W, PF 0.988
– Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of /- 10%.

Thermal:

– Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
– Maximum ambient temperature (Ta max.): 40° C
– Minimum ambient temperature (Ta min.): 5° C
– Total heat dissipation (calculated, /- 10%): 2000 BTU/hr.

Approvals:

– EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
– EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
– US safety: UL 1573
– US EMC: FCC Part 15 Class A
– Canadian safety: CSA C22.2 No. E598-2-17 (CSA E60598-1)
– Canadian EMC: ICES-003 Class A
– Australia/NZ: C-TICK N4241

Included Items:

– Two omega brackets for rigging clamp attachment: P/N 91602001