Martin RUSH MH 5 Profile US

This compact and bright LED profile moving head with efficient optics punches out a variety of effects and colors. With two color wheels, two gobo wheels and rotating prism the MH 5 Profile offers full effect in a super compact housing, making it perfect for DJs, bands, clubs, bars, cruise ships and installations where small footprint and low weight is critical.

Features:

– Compact 75 W LED profile moving head
– Super bright – efficient optics
– Rotating gobo wheel
– Fixed gobo wheel
– 2 x color wheels
– Electronic dimming and strobe
– 3-facet prism

Specifications:

Physical:

– Length: 290 mm (11.5 in.)
– Width: 187 mm (7.4 in.)
– Height: 416 mm (16.4 in.)
– Weight: 9 kg (19.9 lbs.)

Dynamic Effects:

– Color wheel 1: 8 colors plus open, rotation with variable direction and speed
– Color wheel 2: 8 colors (incl. 1 x UV, 2 x CTC) plus open, rotation with variable direction and speed
– Rotating gobo wheel: 6 gobos plus open, wheel rotation and gobo rotation
– Static gobo wheel: 7 gobos plus open, wheel rotation and shake
– Electronic ‘shutter’ effect: Strobe effect, pulse effects, instant open and blackout
– Prism: Indexing and rotation with variable direction and speed
– Focus: Motorized
– Electronic dimming: 0 – 100%, four dimming curve options
– Pan: 540°
– Tilt: 270°
– Pan and tilt speed: Adjustable via onboard control panel and DMX

Control and Programming:

– Control options: DMX, stand-alone
– DMX channels: 16
– Stand-alone trigger options: Music trig, auto trig
– Stand-alone sequences: 4 pre-programmed shows
– Music trig sensitivity: Adjustable
– Setting and addressing: Control panel with backlit LCD display
– Protocol: USITT DMX512/1990

Optics:

– Beam angle: 16° (one-tenth peak), 14° (half-peak)
– Light source: 75 W LED engine
– Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
– *Figure obtained under manufacturer’s test conditions

Construction:

– Color: Black
– Housing: High-impact flame-retardant thermoplastic
– Protection rating: IP20

Gobos:

– Rotating gobo size: 24 mm (0.94 in.)
– Rotating gobo image size: 20 mm (0.79 in.)

Installation:

– Mounting: One quarter-turn bracket for rigging clamp
– Location: Indoor use only, must be fastened to surface or structure
– Orientation: Any

Connections:

– AC power in/thru: Neutrik PowerCon
– DMX data in/out: 3-pin and 5-pin locking XLR

Electrical:

– AC power: 100-240 V nominal, 50/60 Hz
– Typical total power consumption: 165 W
– Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Typical Power and Current:

– 100 V, 60 Hz: 1.7 A, 165 W
– 230 V, 50 Hz: 0.8 A, 157 W
– Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal:

– Cooling: Forced air (temperature-regulated, low noise)
– Maximum ambient temperature (Ta max.): 40° C (104° F)
– Minimum ambient temperature (Ta min.): 0° C (32° F)
– Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 565 BTU/hr.

Approvals:

– EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
– EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
– US safety: UL 1573
– US EMC: 47 CFR Part 15 Class A
– Canadian safety: CSA C22.2 No. 166
– Canadian EMC: ICES-003 Class A
– Australia/NZ: C-TICK N4241

Included Items:

– Power cable, 1.5 m, without mains plug