Martin RUSH MH 6 Wash CT

The RUSH MH 6 Wash CT is designed for key lighting applications within the House of Worship, Performing Arts and Live Stage environments where color temperature control of white light is critical but also a compact and light weight design is desired for smaller applications

The RUSH MH 6 WASH CT is a bright single-lens LED moving head with fully premixed white color temperatures. With twelve 10W WW/CW (warm white and cold white) LEDs and a 10° to 60° motorized zoom, it offers full electronic dimming and variable strobe effects controlled via DMX.

Features:

– 2,700K to 7,800K Color Temp Range
– Allows key lighting to be matched for multiple sources from Tungsten to Metal Halide
– 10-60 Degree Zoom System
– Compact and lightweight design
– Can be used as a Mid effect with a tight beam look to washing a stage for key lighting applications
– Ideal for applications that have limited ceiling height or weight restrictions.

Specifications:

Physical:

– Length: 290 mm (11.4 in.)
– Width: 189 mm (7.4 in.)
– Height: 360 mm (14.2 in.)
– Weight: 7.1 kg (15.7 lbs.)

Dynamic Effects:

– Color temperature: 2700 K – 7800 K
– Color temperature presets: 2700 K to 7800 K in ~100 K steps
– Electronic dimming: 16-bit, 0 – 100%, four dimming curve options
– Strobe and pulse effects: Variable speed and action, random strobe
– Electronic ‘shutter’ effect: Instant open and blackout
– Zoom: Motorized, 10 – 60°
– Pan: 540°, 16-bit control
– Tilt: 220°, 16-bit control

Control and Programming:

– Control options: DMX
– DMX channels: 12
– 16-bit fine control: Dimming, pan and tilt
– DMX address setting: Control panel with LCD display
– DMX compliance: USITT DMX512/1990

Optics:

– Light source: 12 x 10 W CWUW LEDs
– Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
– Zoom range: 10° – 60°
– *Figure obtained under manufacturer’s test conditions

Construction:

– Housing: High-impact flame-retardant thermoplastic
– Color: Black
– Ingress protection rating: IP20

Installation:

– Mounting points: One quarter-turn bracket for rigging clamp
– Location: Indoor use only, must be fastened to surface or structure
– Orientation: Any
– Minimum distance to illuminated surfaces: 200 mm (8 in.)
– Minimum distance to combustible materials: 100 mm (4 in.)
– Minimum clearance around fans and vents: 100 mm (4 in.)

Connections:

– AC power input: Neutrik PowerCon
– AC power throughput: Neutrik PowerCon
– DMX data in/out: 3-pin and 5-pin locking XLR

Electrical:

– AC power: 100-240 V nominal, 50/60 Hz
– Power supply unit: Auto-ranging electronic switch mode
– Fuse: T 3.15 A
– Recommended Miniature Circuit Breaker*: Type D
– * Per IEC 60898/UL489/CSA C22.2 No. 5
– Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Typical Power and Current:

– 120 V, 60 Hz: 1.3 A, 150 W, PF 0.99
– 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94
– Typical half-cycle RMS inrush current at 240 VAC: 11.3 A
– Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal:

– Cooling: Forced air (temperature-regulated, low noise)
– Maximum ambient temperature (Ta max.): 40° C (104° F)
– Minimum ambient temperature (Ta min.): 0° C (32° F)

Approvals:

– EU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493
– EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
– US safety: UL 1573, UL 8750
– US EMC: CFR Title 47 Part 15
– Canadian safety: CSA C22.2 No. 166
– Australia/NZ: C-TICK N4241 / RCM

Included Items:

– Power input cable, 6 A, 18 AWG, UL, 0.75 mm2, H05VV-F, 1.5 m (4.9 ft.), without mains plug
– Omega bracket for rigging clamp attachment