Martin RUSH MH 8 Mini Profile

The RUSH MH 8 Mini Profile is Martin Professional’s smallest moving head to date with super sharp optics and an impressive output that punches above its class. High speed pan and tilt with separate color and gobo wheels allow designers maximum flexibility from the lounge bar to the high-energy dance floor, and all within an affordable price bracket.

The MH 8 Mini Profile uses the latest 18 W white LED technology that delivers super sharp optics with over 800 lumens via a 14° beam angle. Eight varied gobos and eight vibrant colors are available, with electronic strobe/dimming, manual focus and high-speed pan and tilt. The eye-catching effects can be controlled via DMX or synchronized to a music beat via audio trig. The compact fixture weighs only 4.5 kg.

Features:

– Super sharp optics
– Crisp, flat gobo projection (class-leading in product category)
– Compact size and low weight
– Latest generation 18 W LED with over 800 lumens (class-leading in product category)
– Separate color and gobo wheels
– Gives maximum flexibility to designers

Specifications:

Physical:

– Length: 157 mm (6.1 in.)
– Width: 237 mm (9.3 in.)
– Height: 327 mm (12.9 in.)
– Weight: 4.5 kg (9.9 lbs.)

Dynamic Effects:

– Color wheel: 8 colors plus open, variable and random rotation
– Gobo wheel: 8 static gobos plus open, variable and random rotation
– Strobe: Variable from 3 – 20 Hz, pulse effects and random strobe
– Electronic dimming: 0 – 100%, four dimming curve options
– Pan: 540°
– Tilt: 230°

Control and Programming:

– Control options: DMX, 4 stand-alone shows, master/slave
– DMX channels: 10
– Stand-alone trigger: Auto, music
– DMX compliance: USITT DMX512/1990
– Interface: Control panel with backlit LCD display

Optics:

– Light source: 18 W OSRAM LE UW Q8WP LED
– Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
– Beam angle: 14°
– Focus: Manual
– *Figure obtained under manufacturer’s test conditions

Construction:

– Color: Black
– Housing: High-impact flame-retardant thermoplastic
– IP rating: IP 20

Installation:

– Mounting points: Bracket for rigging clamp
– Location: Dry location only, must be fastened to surface or structure
– Orientation: Vertical (head down if suspended)
– Minimum distance to illuminated surfaces: 200 mm (8 in.)
– Minimum distance to combustible materials: 100 mm (4 in.)
– Minimum clearance around fans and vents: 100 mm (4 in.)

Connections:

– AC power input: IEC
– DMX data in/out: 3-pin and 5-pin locking XLR

Electrical:

– AC power: 100-240 V nominal, 50/60 Hz
– Power supply unit: Auto-ranging electronic switch mode
– Fuse: T 2.0 A

Typical Power and Current:

– 120 V, 60 Hz: 52 W, 0.8 A
– 230 V, 50 Hz: 50 W, 0.5 A
– Typical half-cycle RMS inrush current: 6.4 A
– Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal:

– Cooling: Forced air (temperature-regulated, low noise)
– Maximum ambient temperature (Ta max.): 40° C (104° F)
– Minimum ambient temperature (Ta min.): 0° C (32° F)
– Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 180 BTU/hr.

Approvals:

– EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
– EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-4-2, EN 61547
– US safety: UL 1573
– US EMC: CFR Title 47 Part 15 Class A
– Canadian safety: CSA C22.2 No. 166
– Canadian EMC: ICES-003 Class A
– Australia/NZ (pending): RCM

Included Items:

– Power cable, 1.9 m (6.3 ft.) without mains plug
– Power cable, 1.9 m (6.3 ft.) with US plug
– Bracket for rigging clamp attachment