Martin RUSH MH1 Profile Plus

This super bright LED profile moving head is even brighter than its predecessor RUSH MH 1 Profile with 50% more output. Efficient optics with an increased beam angle from 13 degrees to 16 degrees punches out a variety of effects and colors from two gobo wheels and two color wheels. For added versatility and effect, it also houses an electronic dimmer and strobe, iris and 3-facet prism and an improved cooling system for quieter operation.

Features:

– LED profile moving head
– Super bright – efficient optics
– Rotating gobo wheel
– Fixed gobo wheel
– 2 x color wheels
– Electronic dimming and strobe
– Iris and 3-facet prism
– 3 & 5 pin XLR

Specifications:

Physical:

– Length: 418 mm (16.5 in.)
– Width: 328 mm (13.0 in.)
– Height: 588 mm (23.2 in.)
– Weight: 18 kg (39.7 lbs.)

Dynamic Effects:

– Color wheel 1: 7 colors plus open, rotation with variable direction and speed
– Color wheel 2: 7 colors (incl. 1 x UV, 2 x CTC) plus open, rotation with variable direction and speed
– Rotating gobo wheel: 7 gobos plus open, wheel rotation, gobo indexing, rotation and shake
– Static gobo wheel: 8 gobos plus open, wheel rotation and shake
– Electronic ‘shutter’ effect: Strobe effect, pulse effects, instant open and blackout
– Prism: Indexing and rotation with variable direction and speed
– Iris: Motorized
– Focus: Motorized
– Electronic dimming: 0 – 100%, four dimming curve options
– Pan: 540°
– Tilt: 270°
– Pan and tilt speed: Adjustable via onboard control panel and DMX

Control and Programming:

– Control options: DMX, standalone
– DMX channels: 17
– Standalone trigger options: Music trig, auto trig
– Standalone sequences: 4 pre-programmed shows
– Standalone memory: 20 scenes
– Music trig sensitivity: Adjustable
– Setting and addressing: Control panel with backlit graphic display
– DMX compliance: USITT DMX512/1990

Optics:

– Light source: 180 W LED engine
– Minimum LED lifetime: 20 000 hours (to >70% luminous output)*
– *Figure obtained under manufacturer´s test conditions

Photometric Data:

– Efficacy: 25.5 lumens per watt
– Cut-off angle: 16°
– Total output: 7100 lm

Construction:

– Color: Black
– Housing: High-impact flame-retardant thermoplastic
– Protection rating: IP20

Gobos:

– Gobo diameter: 26.8 mm +/- 0.2 mm (1.1 in. +/- 0.008 in.)
– Max. image diameter: 22.0 mm (0.87 in.)
– Gobo thickness: 0.3 – 3.5 mm (0.01 – 0.14 in.)
– Gobo material: Steel, aluminum or borosilicate glass

Installation:

– Mounting points: Two quarter-turn brackets for rigging clamps
– Location: Dry location only, must be fastened to surface or structure
– Orientation: Any

Connections:

– AC power in/thru: Neutrik PowerCon
– DMX data in/out: 3-pin and 5-pin locking XLR

Electrical:

– AC power: 100-240 V nominal, 50/60 Hz
– Typical total power consumption: 300 W
– Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Thermal:

– Cooling: Forced air, temperature controlled
– Maximum ambient temperature (Ta max.): 40° C (104° F)
– Minimum ambient temperature (Ta min.): 0° C (32° F)
– Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 1010 BTU/hr.

Approvals:

– EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
– EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
– US safety: UL 1573
– US EMC: 47 CFR Part 15 Class A
– Australia/NZ: RCM

Included Items:

– Power cable, 1.5 m (4.9 ft.), without mains plug
– Two Omega clamp attachment brackets with 1/4-turn fasteners