Martin RUSH Strobe 1 5×5
This white strobe/blinder is a 5 x 5 LED matrix panel with individually-controllable LEDs. Controllable via multiple DMX options or sound activated, it includes preprogrammed effect, letter and number macros for easy-to-produce graphics and messaging. Panels link via an integrated horizontal and vertical locking mechanism.
Features:
– White LED strobe/blinder
– 5 x 5 matrix panel
– Individually controllable LEDs
– Preprogrammed macros (effects, letters, numbers, etc.)
– Linkable – integrated horizontal and vertical locking
– DMX or sound activated
– Multiple DMX control options
– 3 & 5 pin XLR
Specifications:
Physical:
– Length: 500 mm (19.7 in.)
– Width: 101 mm (4.0 in.)
– Height: 500 mm (19.7 in.)
– Weight: 9.5 kg (20.9 lbs.)
Dynamic Effects:
– Strobe effect: Electronic, with regular and random pulse, burst and strobe effects
– Pre-programmed effects: Effect, letter and number display macros
– Electronic dimming: 0 – 100% continuous, individually dimmable pixels
– Effects orientation: Standard or inverted 180°
Control and Programming:
– Control options: DMX, stand-alone
– DMX channels: 4/25/29
– Stand-alone trigger options: Music trig, auto trig
– Stand-alone sequences: 8 pre-programmed shows or random show
– Stand-alone memory: 20 scenes
– Setting and addressing: Control panel with LED display
– DMX compliance: USITT DMX512/1990
Optics:
– Light source: 25 x 5 W Cree cool white LEDs
– Color temperature: 6000 – 6500 K
– Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
– *Figure obtained under manufacturer´s test conditions
Construction:
– Color: Black
– Housing: Steel
– Protection rating: IP20
Installation:
– Location: Indoor use only, must be fastened to surface or structure
– Mounting points: Integral hanging brackets (removable), side-by side mounting locks
– Orientation: Any
Connections:
– AC power in/thru: Neutrik PowerCon
– DMX data in/out: 3-pin and 5-pin locking XLR
Electrical:
– AC power: 100-240 V nominal, 50/60 Hz
– Typical total power consumption: 148 W
– Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current:
– 110 V, 60 Hz: 2.0 A, 148 W
– 230 V, 50 Hz: 1.2 A, 146 W
– Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal:
– Cooling: Forced air (temperature-regulated, low noise)
– Maximum ambient temperature (Ta max.): 40° C (104° F)
– Minimum ambient temperature (Ta min.): 0° C (32° F)
– Total heat dissipation (calculated, +/- 10%): 510 BTU/hr.
Approvals:
– EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
– EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
– US EMC: 47 CFR Part 15 Class A
– Canadian EMC: ICES-003 Class A
– Australia/NZ: C-TICK N4241
Included Items:
– Power cable 1.5 m
– Mounting brackets incl. screws