Martin RUSH Strobe 1 5×5

This white strobe/blinder is a 5 x 5 LED matrix panel with individually-controllable LEDs. Controllable via multiple DMX options or sound activated, it includes preprogrammed effect, letter and number macros for easy-to-produce graphics and messaging. Panels link via an integrated horizontal and vertical locking mechanism.

Features:

– White LED strobe/blinder
– 5 x 5 matrix panel
– Individually controllable LEDs
– Preprogrammed macros (effects, letters, numbers, etc.)
– Linkable – integrated horizontal and vertical locking
– DMX or sound activated
– Multiple DMX control options
– 3 & 5 pin XLR

Specifications:

Physical:

– Length: 500 mm (19.7 in.)
– Width: 101 mm (4.0 in.)
– Height: 500 mm (19.7 in.)
– Weight: 9.5 kg (20.9 lbs.)

Dynamic Effects:

– Strobe effect: Electronic, with regular and random pulse, burst and strobe effects
– Pre-programmed effects: Effect, letter and number display macros
– Electronic dimming: 0 – 100% continuous, individually dimmable pixels
– Effects orientation: Standard or inverted 180°

Control and Programming:

– Control options: DMX, stand-alone
– DMX channels: 4/25/29
– Stand-alone trigger options: Music trig, auto trig
– Stand-alone sequences: 8 pre-programmed shows or random show
– Stand-alone memory: 20 scenes
– Setting and addressing: Control panel with LED display
– DMX compliance: USITT DMX512/1990

Optics:

– Light source: 25 x 5 W Cree cool white LEDs
– Color temperature: 6000 – 6500 K
– Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
– *Figure obtained under manufacturer´s test conditions

Construction:

– Color: Black
– Housing: Steel
– Protection rating: IP20

Installation:

– Location: Indoor use only, must be fastened to surface or structure
– Mounting points: Integral hanging brackets (removable), side-by side mounting locks
– Orientation: Any

Connections:

– AC power in/thru: Neutrik PowerCon
– DMX data in/out: 3-pin and 5-pin locking XLR

Electrical:

– AC power: 100-240 V nominal, 50/60 Hz
– Typical total power consumption: 148 W
– Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Typical Power and Current:

– 110 V, 60 Hz: 2.0 A, 148 W
– 230 V, 50 Hz: 1.2 A, 146 W
– Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal:

– Cooling: Forced air (temperature-regulated, low noise)
– Maximum ambient temperature (Ta max.): 40° C (104° F)
– Minimum ambient temperature (Ta min.): 0° C (32° F)
– Total heat dissipation (calculated, +/- 10%): 510 BTU/hr.

Approvals:

– EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
– EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
– US EMC: 47 CFR Part 15 Class A
– Canadian EMC: ICES-003 Class A
– Australia/NZ: C-TICK N4241

Included Items:

– Power cable 1.5 m
– Mounting brackets incl. screws