Martin RUSH Strobe CWL US

This bright and compact LED linear strobe utilises 99 x 3 W Cree XP-D LEDs with a reflector design that offers a traditional Xenon strobe look with a 17,000 lumen output. From a single flash to a blinder effect, the RUSH™ Strobe CWL is the perfect companion for mobile DJs, lounge bars, venues and cruise ships.

Features:

– Compact LED linear strobe
– 17,000 lumens output
– Color system: 99 x cold white LED
– 87° beam angle
– 8 strobe macros

Specifications:

Physical:

– Length: 505 mm (19.9 in.)
– Width: 140 mm (5.5 in.)
– Height: 226 mm (8.9 in.)
– Weight: 4.0 kg (8.9 lbs.)

Dynamic Effects:

– Strobe rate: 0 – 25 Hz
– Strobe duration: 0 – 10 ms (50 Hz supply), or 0 – 8.3 ms (60 Hz supply)
– Blinder effect: Continuous with auto fade
– Special effects: Ramp up/down, up-down, random flash, lightning, blinder, single flash

Control and Programming:

– Control options: DMX, stand-alone, master/slave, sound trigger
– DMX channels: 1 or 4
– Setting and addressing: Control panel with LCD display
– Compliance: USITT DMX512/1990

Optics:

– Beam angle: 87°
– Light source: 99 x 3 W CREE white XB-D LED
– Color temperature: 7000-8000 K
– Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
– *Figure obtained under test conditions

Construction:

– Color: Black
– Housing: Steel and aluminum
– Protection rating: IP 20

Installation:

– Mounting points: Bracket with 13.5 mm holes
– Orientation: Any
– Location: Indoor use only, must be fastened to surface or structure
– Minimum distance to illuminated surfaces: 0.2 m (8 in.)
– Minimum distance to combustible materials: 0.1 m (4 in.)
– Minimum clearance around fans and vents: 0.1 m (4 in.)

Connections:

– AC power in/thru: Neutrik PowerCon
– DMX data in/thru: 3-pin and 5-pin locking XLR

Electrical:

– AC power: 100-240 V nominal, 50/60 Hz
– Power supply unit: Diode bridge

Typical Power and Current:

– 110 V, 60 Hz: 2.5 A, 250 W, PF 0.9
– 230 V, 50 Hz: 2.7 A, 380 W, PF 0.6
– Measurements made at nominal voltage. Allow for a deviation of +/-10%.
– PF = Power Factor

Thermal:

– Cooling: Forced air (temperature regulated, low noise)
– Maximum ambient temperature (Ta max.): 40° C (104° F)
– Minimum ambient temperature (Ta min): 0° C (32° F)

Approvals:

– EU safety: EN 60598-2-17 (EN 605981-1)
– EU EMC: EN 55015, EN55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
– US safety: UL 1573
– US EMC: 47 CFR Part 15 Class A
– Canadian safety: CSA 22.2 No. 166
– Australia/NZ: C-Tick N4241

Included Items:

– EU version: 1.5 m (5 ft.) power cable without mains plug, mounting bracket
– US version: 1.5 m (5 ft.) power cable with mains plug, mounting bracket