Millennia HV-316 Sixteen Channel Remote Dante Network Mic Preamp

Unrestricted Capacity, Uncompromised Clarity

• 8 or 16 channels of pristine Millennia HV-3 microphone preamplifiers in a road-hardened 1U chassis
• Effortless, vividly realistic, dynamically uniform HV-3 musical performance
• Dante network output standard — analog output option
• Both 12VDC (battery) and 80-264VAC worldwide powering
• Redundant power supply for fail-safe, glitch-free operation
• Paralleled next-generation AKM A-to-D conversion
• Designed for ultra-high-temperature continuous operation (65C / 150F)
• RF “pi filter” shielding provided on analog and digital feeds, destroys mobile interference
• Control up to 256 channels at once via conventional Ethernet
• +34dBu input headroom for use in the most extreme audio environments
• Matched discrete-octet transistor gain topology, the classic Millennia HV-3 double-balanced circuit
• AElogic Mac & Windows third-generation software offers total control for both HV-316 and HV-3R on the same network
• High-definition meters, grouping, linking, scene management, temperature monitoring
• Entirely balanced audio path with precision components maintains signal integrity: THD under 10 PPM (< .001%)
• Laser-trimmed FET-based output stage (analog output option) drives 1000-foot (300m) cable runs with ease
• All channels matched to 0.08 dB
• Advanced power supply rated for 650,000 hours MTBF operation
• Aluminum 16-gauge rack chassis, ultra-lightweight, just 10 pounds
• Billet aluminum laser etched front-panel
• Lovingly hand-built and quality-assured in Northern California USA

To learn more about Millennia Media, Click Here

View more products from Millennia Media,

• Minimum Gain: 1 dB
• Maximum Gain (1 dB per step): 64 dB
• Attenuator Pad: -20 dB
• Frequency Response (analog output option) (+0 / -3 dB): sub 8 Hz to beyond 200 kHz (analog)
• Noise (60 dBu Gain, 10 Hz - 30 kHz, Inputs common): -130 dB EIN
• Total Harmonic Distortion + Noise (35 dB Gain): < .005%, (<.001% Typ.)
• Intermodulation Distortion (50 Hz & 7 kHz), 35 dB Gain, 0 dBFS: < .0009%
• Phase Response (35 dB Gain, 50 Hz - 20 kHz bandwidth, 0 dBFS: < 2 degrees deviation
• Common Mode Rejection Ratio (35 dB Gain, 10 Hz - 20 kHz bandwidth, 100 mV C.M.): > 65 dB, Typ > 85 dB
• Slew Rate (35 dB Gain): > 25 Volts per microsecond
• Maximum Input Level (20 Hz - 40 kHz): +34 dBu (pad in)
• Maximum Output Level (20 Hz - 40 kHz): +22 dBu (analog output option)
• Phantom Input Impedance (1 kHz): 6,750 ohms
• Output Impedance: 24.3 Ohms (analog output option)
• Phantom Powering: +48 V dc, +/- 2 V dc, 15 ma per channel in reserve
• Power Consumption:
• 100 watts maximum
• AC: Universal 80-264V, 47-63 Hz
• DC: 12V
• Dimensions: 19" W x 1.75" H x 16" D

Dante:

• Physical Layer: Ethernet
• Connectors: Dual RJ-45 (Primary / Secondary)
• Cable Quality: CAT-5e or better
• Transmission Speed: 1Gbps
• Supported Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
• Minimum Dante Latency: 250 µS
• Supported Modes: Redundant / Switched
• AES67 Support: Planned (Dante embedded)
• Certifications:
• FCC CFR 47 Part 15 Subpart B, Class A
• ICES-03 Issue 6 (Canada)
• ANSI C63.4-2014
• EN 55032:2015, EN 55035:2017, EN 61000-3-2:2014, EN 61000-3-3:2013
• Compliance:
• RoHS 2011/65/EU (and delegated directive (EU) 2015/863)
• WEEE 2012/19/EU + REACH
• Environmental:
• -10o to +65oC / +15o to +150oF (fans enabled)
• -10o to +45oC / +15o to +115oF (fans disabled)
• 10% to 80% RH
• Maximum Altitude: 5,000 meters