Millennia NSEQ-2 Stereo Parametric Equalizer

Full Timbral Control, Total Signal Integrity

• Two paths to perfection with Twin Topology
• Fully parametric stereo EQ with unprecedented sonic purity and integrity
• All triode 300 V vacuum tube signal path or all discrete J-FET solid state signal path
• Both topologies are entirely transformerless high voltage pure Class A
• Minimalist design: only one active stage in the audio path
• Four EQ bands: 20 Hz to 20 kHz center frequency, 0.4 to 4.0 Q
• Extremely low noise: -106 dBu
• Constructed for demanding professional applications
• Ultra-Premium components throughout
• Gold relays, connectors, switches, tube sockets
• Silver Teflon power wiring, Mogami Neglex OFC audio wiring
• Lovingly hand-crafted in Northern California

To learn more about Millennia Media, Click Here

View more products from Millennia Media,

• "Q" Range:
• Q = 0.4 to 4.0 Adjustable on middle ranges
• Q = 1.0 Fixed on low & high ranges
• Maximum Output Level: > + 28 dBu (VT)
• Maximum Input Level (EQ Flat): + 28 dBu (VT)
• Maximum Input Level (EQ Full Boost): + 17 dBu (VT)
• Frequency Response:
• +0 / -3 dB: sub 2 Hz to beyond 300 kHz
• Frequency Response, Stereo Deviation: +/- 0.5 dB (with Mastering Option)
• Noise (All EQ Stages In, Controls Flat): -106 dBu (SS), -94 dBu (VT)
• Maximum Boost (21 Step Detented): +20 dB (+10 dB with range switch in)
• Maximum Cut (21 Step Detented): -20 dB (-10 dB with range switch in)
• EQ Frequencies:
• Low Range Switch (Centers - Peak/Shelf Selectable): 20, 34, 56, 100, 180, 270
• Low Mid Sweep:
• 20 Hz - 220 Hz or 200 Hz - 2.2 kHz
• 10X Range switch selectable
• Hi Mid Sweep:
• 250 Hz - 2.5 kHz or 2.5 kHz - 25 kHz
• 10X Range switch selectable
• High Range Switch (Centers - Peak/Shelf Selectable): 4.8 k, 5.8 k, 8.0 k, 10 k, 16 k, 21 k
• THD + Noise:
• 20 Hz - 30 kHz, All EQ Bands Switched In: < .009%, typ < .003 % (VT or SS)
• Common Mode Rejection Ratio (With Balanced Option):
• 10 Hz - 20 KHz, 100 mV C.M.: > 60 dB, Typ > 80 dB
• Slew Rate, +27 dBu Out: > 50 volts per microsecond
• Main Hard-wire Bypass Switch For Each Channel?: Yes
• Peak/Shelf Selection On High & Low Range?: Yes
• Hard-wire Bypass Switching On Individual EQ Bands?: Yes
• Input Impedance: 25 kilohms
• Minimum Output Load Impedance: 1 kilohm (VT), 150 ohms (SS)
• Recommended Load: > 3 kilohms (VT)
• Output Impedance: < 300 ohms (VT), < 5 ohms (SS)
• Twin Topology EQ Amplifiers:
• Switch In: Pure Class-A Discrete J-FETs
• Switch Out: Pure Class-A Triode Tubes
• Power Consumption: 40 watts maximum
• Power Requirements: Selectable: 100-120, 200-240 V ac, 50/60 Hz
• Dimensions: 19" W x 3.5" H x 12.5"