Prism Lyra-2 USB Audio Interface (Demo Unit)

This Prism is a open demo therefore we can’t sell it as new. It includes all of the original packaging as well as full warrant.  Sonic Circus is an authorized Prism Sound dealer.

The Prism Lyra-2  is one of the Lyra family of USB audio interfaces offers Prism Sound performance at its most affordable ever. They are based on the Orpheus audio path and clock circuitry, but in a smaller package for those who don’t need eight channels of analogue I/O.

Lyra is based on an ARM Cortex processor design which offers class-compliant USB and the possibility for future Ethernet AVB interfacing, plus DSP and local mixing capacity beyond that of the present Orpheus platform.

Signal path

Analogue and digital input channels are available as inputs for your audio workstation software through the host computer’s audio driver. Similarly, analogue and digital outputs and stereo headphone outputs can be played independently.

For low-latency foldback or monitoring to headphone or main outputs, each output pair (1-2, 3-4, digital out or the headphone output) can optionally be driven from the built-in DSP mixer with an individual local mix of any selection of inputs through the controller applet. All analogue inputs are electronically balanced with automatic unbalanced operation. Analogue outputs are electronically balanced with ‘bootstrapping’, i.e. level is maintained if one leg is grounded.

No-compromise, full Prism Sound audio quality

Lyra makes no compromises on audio quality. It is the result of years of research and development into digital audio conversion and extensive dialogue with Prism Sound’s customers.

The Lyra design brief was: Prism Sound quality at an even more accessible price point. Lyra has the same no-compromise analogue front and back ends as its brother Orpheus, with the same fully-balanced-throughout architecture and the same isolation barriers protecting the analogue from digital and computer interference.

Lyra draws on Prism Sound’s years of experience in developing digital audio products, including its range of audio test equipment, adopted by a wide variety of clients across the audio industry from pro-audio to consumer electronics. This experience means that Lyra is well-behaved both as a computer peripheral and an audio processor.

Reliability is vitally important in professional recording. Prism Sound has always made extensive use of precise software calibration techniques in its converters – pots and tweaks are always unreliable, so there are none.

The design team has gone to great lengths to minimise noise and interference, in particular hum. All of the analogue circuits have galvanic isolation, while the unit’s electronically balanced I/O allows it to handle common mode interference sources as well as enabling trouble-free connection to unbalanced equipment.

It is often said that THD+N figures do not always correlate well with the perception of sound quality and this is true – partly because the traditional measures of THD+N or SINAD expressed as RMS figures are rather a broad measure. With this in mind, we have taken great care to make sure that not only is the RMS THD+N figure very good, but the Lyra noise and distortion spectrum is beyond reproach and that Lyra provides the most transparent listening experience.

Standards compliant USB interface

For Lyra, we have created a unit that is compatible with the widest range of computer hardware by using a USB2 interface. This is a UAC2 (USB Audio Class 2) interface supported natively in Mac, Linux and Android, and in Windows via a driver.

Prism Sound has taken on board the increasing importance of native processing power for professional users and the fact that software products for standard PC and Mac platforms have been greatly enhanced in recent years.

Prism Sound is probably best known for A/D and D/A converters such as the venerable ADA-8XR and Orpheus, which already provides a solution for those needing a FireWire interface. However, the flexibility and versatility of the ADA-8XR comes with a higher price tag, reflecting the fact that no other interface provides such exceptional audio performance or can work directly into Pro Tools Core/Processing cards, as well as running a concurrent DSD processor or FireWire interface.

Lyra is easy to connect to your computer and to your outboard gear. For Windows users ASIO is provided (WDM coming soon), while for Mac OS X 10.4 or later, Lyra interfaces directly to Core Audio. For both Mac and PC platforms, there is a controller application to configure the unit and control its built-in mixer and other functions. Aside from the monitor and headphone level controls, everything else is operated solely from the Lyra controller application. The controller software opens on-screen as a separate panel alongside your existing editing software. Since Lyra is UAC2 compliant, it will also work in recent Linux and Android builds, although no control panel is provided.

Looking to the future, low-latency synchronised networked audio and video is now becoming a reality with the implementation of AVB (Audio Video Bridging), an IEEE 802.1 networking standard. Prism Lyra-2 is planned to support AVB in future firmware updates.

Flexible Inputs and Outputs

Our professional users wanted a highly integrated solution with stereo inputs serving as line, instrument or microphone inputs, and line outputs that could be used for stereo monitoring, mastering and/or foldback to performers. Lyra offers up to four monitoring outputs, digital inputs and outputs as stereo AES3 or S/PDIF or up to 8 channels of digital I/O on the ADAT optical format, plus stereo headphones.

Lyra’s analogue inputs support various capabilities. Lyra has the same excellent mic amps as Orpheus with software-controlled gain in 1dB steps, switchable phantom power, a 20dB pad – and very low noise and distortion. These inputs are auto-sensing with software over-ride. On Lyra 1, channel 1 can be instrument or line, channel 2 can be microphone or line. On Prism Lyra-2 , inputs 1 and 2 can be microphone, instrument or line. Analogue inputs have individually-selectable Prism Sound “Overkiller” peak limiters built in, just as on the higher-priced ADA-8XR and Orpheus, to catch those fast transients. The Overkiller threshold automatically follows the operating line-up level selection (+4dBu or -10dBV). Overkillers are ideal for percussive sounds, particularly drums, where headroom can be a problem.

The co-axial digital I/O port can be switched in the Prism Lyra-2 controller applet between S/PDIF and AES3 formats. This control changes the operating voltage and the Channel Status format and is complemented by two in-line adaptor leads that provide external XLR connections for AES3 devices. The optical digital I/O ports on Prism Lyra-2 can also be configured as ADAT I/O. Other connections include wordclock sync I/O on BNC connectors (Prism Lyra-2 only).

Digital Mixer

Our customers also identified a need for a unit that could provide low latency foldback to performers, particularly when tracking and overdubbing. In answer to this need, Lyra has a built-in digital mixer that can be configured from the host computer to provide foldback feeds to performers, each with their own stereo mix of workstation playback and any of the inputs.

The question of latency in computer interfaces, especially USB and FireWire boxes, is an important one. Obviously there are situations where the round-trip latency needs to be really short, like in overdubbing. The problem is that even if the latency on the interface and in the driver is as short as it could ever be, a native DAW is busy with plug-ins and other software and buffer times are probably set long. The only answer is to provide local foldback mixing in the interface. This is not new, and other products feature it, but most local mixers in competitive products are just too basic. Lyra provides ‘console quality’ local mixing – each output has its own independent mixer, with channel strips for all inputs and workstation feeds, complete with fader, pan/balance pot, solo and mute buttons, and full metering. Strips can be stereo or mono, and the mixes are dithered with filtered coefficients, just as in a top-end digital mixer.

There is a very small residual delay through the A/D and D/A conversion process in the foldback path, mostly from filters used for decimation and interpolation. However, with the low-latency Prism Sound DSP mixer, the worst-case delay through the A/D and D/A path is only 0.5ms and is significantly less at higher sampling rates – to put this into perspective, it’s equivalent to standing approximately 15cm (6 inches) further from a speaker and is generally reckoned to be small enough not to be problematic.

Although the unit’s outputs will mainly be used for monitoring or foldback, the fact that they are of such high quality makes them suitable for a range of other applications such as insertion points, analogue summing or driving analogue mastering chains.

Sample Rate Conversion and Noise Shaping

The digital output is equipped with the four Prism Sound SNS noise-shaping curves and includes Prism Sound’s renowned synchronous sample-rate conversion (Prism Lyra-2), allowing outputs to various external devices at other sampling rates. The sample-rate converter can be used at the outputs as well as the inputs, so as well as dealing with unsynchronised or wrong-rate digital inputs, Lyra can also generate, say, a live 44.1kHz output from a 96kHz session. Since Lyra also includes the full suite of the famous Prism Sound ‘SNS’ noise shapers, you can also reduce to 16-bits for CD at mastering-house quality. Lyra 1 supports sample rate conversion on the input only.

Unsurpassed Jitter Rejection

In the 1990s Prism Sound pioneered testing of sampling and interface jitter and as a result our digital audio products deliver unsurpassed jitter rejection. Prism Sound digital audio products lock up fast and re-generate ultra-stable clock outputs. Another aspect of the traditional Prism Sound converter that is retained was the clocking – it’s just as important as analogue-path considerations sound-wise. Lyra uses the same CleverClox dual digital phase-locked loop (DPLL) circuitry as Orpheus so whether it’s providing a high-quality master clock for the rest of the room (Prism Lyra-2 only), or dealing with a jittery clock from outside, Lyra is as rock-steady as its forbears.

Support

Over the years, Prism Sound’s reputation for audio quality has been matched by its reputation for after-sales support and technical advice. Lyra has the benefit of that support and customers have access to one of the best technical teams in the business.

Prism Lyra-2 Summary

2 A/D Analogue input channels select from:

• 2 x Microphone XLR inputs with phantom power and 20dB pads
• 2 x High-impedance front panel instrument inputs
• 2 x Balanced line inputs on TRS jack
• 4 D/A Analogue Line Output channels
• Headphone output with independent mix and volume control
• S/PDIF Digital in and out on RCA/phono
• S/PDIF / ADAT Digital in and out on TOSLINK optical
• AES3 mode on RCA/Phono with supplied XLR adaptor
• Word-clock sync I/O on BNC connectors
• Sample rate conversion on digital inputs or outputs
• Ethernet port for future expansion

Features:

• No-compromise, full Prism Sound audio quality
• Class compliant (UAC2) USB interface
• ASIO drivers for Windows (32 and 64bit)
• Windows WDM drivers for Vista and later
• Native CORE AUDIO on Mac OS X
• UAC2 operation on Linux (no control panel)
• Outputs selectable between workstation bus or Lyra mixer
• Prism Sound SNS noise shaping on digital outputs (4 curves)
• Low-latency “console-quality” digital mixer for foldback monitoring
• Fader, pan, cut, solo on every mixer channel
• Front-panel master volume control, assignable to selected channels
• State-of-the-art clock generation with proprietary hybrid 2-stage DPLL
• Fully-floating (isolated) balanced architecture for optimum noise rejection

Brand	Prism Sound
Condition	New

Lyra 2 Front Panel

- Instrument Inputs: 2 x 6.3mm mono jack sockets, auto-select to analogue inputs 1 & 2 when plugged, software override
- Headphone Output: 1 x 6.3mm stereo TRS Jack with illuminated volume control
- Master volume : Assignable encoder / push switch with halo indication
- Standby button: with standby indicator (also flashes when unit is in 'identify' mode)

Indication:

- Level Meters: 4 x multi-segment, multi-colour bargraphs with overload indication, 2 for analogue, 2 for digital, assignable to inputs or outputs, analogue outputs switchable 1/2 or 3/4.
- Input selection: Indicate mode of analogue inputs as Mic / line / inst & plus phantom power indicator for mic mode
- Overkiller: For analogue inputs, lit when Overkiller limiters are acting
- Digital Input: indicators for digital input unlocked and SRC (sample-rate converter) selected
- Digital Output: indicator for SRC (sample-rate converter) selected
- Sync: Master indicator, lit when interface is in local sync

Lyra 2 Rear Panel

- Mic inputs 2 x XLR sockets
- Line inputs 2 x 6.3mm TRS jack sockets (balanced or unbalanced)
- Line outputs 1-4 4 x 6.3mm TRS jack sockets (balanced or unbalanced)

Digital inputs:

- 1 x RCA
- 1 x TOSLINK for S/PDIF or ADAT Optical input; (RCA can operate as AES3 input using XLR-RCA adapter supplied)

Digital output :

- 1 x RCA
- 1 x TOSLINK for S/PDIF or ADAT Optical output; (RCA can operate as AES3 output using XLR-RCA adapter supplied)

- Wordclock: 2 x BNC sockets, output and input (75Ω)
- USB port: 1 x USB type B receptacle
- Network port: 1 x RJ45 AVB ethernet port
- Mains power: 3-pin 6A IEC inlet

Software Support

- Mac OS Support: OS X 10.5 or later Intel platform
- Windows OS Support: Windows Vista, 7, 8 or later (32 or 64 bit)
- Mac audio driver: Core Audio device
- Windows audio driver: ASIO device, WDM coming soon
- Linux audio driver: Lyra is a UAC2 class compliant device - no driver needed on recent distros
- Control Panel applet: Graphical user interface for control of Lyra unit under Mac OS X or Windows

Analogue Line Inputs

- Configuration: Electronically balanced, with fully-balanced analogue signal path
- Input Sensitivity: Switchable '+4dBu' (0dBFS = +18dBu) or '-10dBV' (0dBFS = +6dBu)
- Input Impedance: 14.5kΩ
- Unbalanced Mode : Automatic
- Total harmonic distortion: -117dB (0.00014%, -0.1dBFS)
- THD+N: -111dB (0.00028%, -0.1dBFS)
- Dynamic Range: 116dB (-60dBFS)
- Gain Accuracy: ±0.05dB
- LF roll-off: -0.05dB at 8Hz; -3dB at <1Hz

HF roll-off:

- fs = 44.1kHz: -0.05dB at 21.1kHz; -3dB at 22.0kHz
- fs = 48kHz: -0.05dB at 23.0kHz; -3dB at 23.9kHz
- fs = 96kHz: -0.05dB at 32.0kHz; -3dB at 47.9kHz
- fs = 192kHz: -0.05dB at 32.0kHz; -3dB at 78kHz

- CMRR 20Hz: 20kHz: >70dB
- Inter-channel cross-talk: 1kHz: <140dB; 20Hz..20kHz: <-120dB

Inter-channel phase:

- 10Hz..5kHz: ±0.25°
- 5kHz..20kHz: ±1.0°
- 20kHz..50kHz: ±2.0°

- Overkiller: Progessive limiter, auto-aligning, selectable per channel
- Impact Filter: High-pass filter, -3dB at 80Hz, 40dB/decade (selectable for channels 1-2; whether in line, mic or instrument mode)

RIAA de-emphasis filter (Lyra 2 only):

Response accuracy:

- ±0.22dB at fs=44.1kHz
- ±0.14dB at fs=48kHz
- ±0.015dB at other sample rates

M-S matrix (Lyra 2 only): Allows direct connection of mid-side mics, or non-matrix mic-preamps

Microphone Preamplifiers

- Configuration Electronically balanced, with fully balanced analogue signal path
- Gain 10dB to 65dB in 1dB steps (0dBFS = -56dBu to -1dBu) plus switchable -20dB pad
- Gain accuracy ±0.05dB
- Input impedance 5.5kΩ

THD:

- +10dB gain: -116dB at -0.1dBFS (0.00016%)
- +40dB gain: -110dB at -0.1dBFS (0.00032%)

THD+N: +10dB gain: -108dB at -0.1dBFS (0.00040%)

Equivalent input noise (EIN):

- +30dB gain: -128.5dBu (0Ω source); -126.3dBu (150Ω source)
- +40dB gain: -130.9dBu (0Ω source); -127.6dBu (150Ω source)
- +50dB gain: -131.2dBu (0Ω source); -127.7dBu (150Ω source)
- +60dB gain: -131.4dBu (0Ω source); -127.8dBu (150Ω source)

- LF roll-off: -0.05dB at 20Hz, -3dB at 5Hz
- HF roll-off: As per analogue line input data (dependent on fs)

CMRR:

- 50Hz/60Hz: >110dB at all gains
- 1kHz: >100dB at all gains
- 20kHz: >90dB at all gains

- Phantom power: +48V, switchable per channel
- Pad: -20dB, switchable per channel

Instrument Preamplifiers

- Configuration: Unbalanced, high impedance buffer
- Gain: 10dB to 65dB in 1dB steps, 18dB pad (0dBFS = -38dBu to 17dBu)
- Gain accuracy: ±0.05dB
- Input impedance: 1MΩ

Analogue Outputs

- Configuration: Electronically balanced, with fully-balanced analogue signal path
- Output amplitude: Switchable '+4dBu' (0dBFS = +18dBu) or '-10dBV (0dBFS = +6dBu)
- Output impedance: 100Ω balanced, 50Ω unbalanced
- Unbalanced mode: Automatic, with bootstrapping level compensation
- Total harmonic distortion: -107dB (0.00045%, -1dBFS)
- THD+N: -106dB (0.00050%, -0.1dBFS)
- Dynamic range: 115dB (-60dBFS)
- Gain accuracy: ±0.05dB
- LF roll-off: -0.05dB at 8Hz, -3dB at <1Hz

HF roll-off:

- fs = 44.1kHz: -0.05dB at 21.4kHz; -3dB at 22.0kHz
- fs = 48kHz: -0.05dB at 23.2kHz; -3dB at 23.9kHz
- fs = 96kHz: -0.05dB at 32.0kHz; -3dB at 47.8kHz
- fs = 192kHz: -0.05dB at 32.0kHz; -3dB at 76kHz

- Output balance: >50dB
- Inter-channel cross-talk: 1kHz: <-135dB; 20Hz..20kHz: <-120dB

Inter-channel phase:

- 10Hz..5kHz: ±0.4°
- 5kHz..20kHz: ±0.25°
- 20kHz..50kHz: ±0.5°

Digital Inputs

- Formats supported: Lyra 2: S/PDIF (RCA or TOSLINK), ADAT, ADAT S/MUX (TOSLINK), AES3 (XLR via supplied adapter cable)
- Sample rates supported: 44.1, 48, 88.2, 96, 176.4 and 192kHz

Sample rates supported: ADAT (Lyra 2 only):

- ADAT (8 channel): 44k1, 48k
- ADAT SMUX (4 channel): 88k2, 96k

- Channel Status: Ignored
- Word-length: 24 bit
- AES3 Operation (Lyra 2): Via S/PDIF RCA, using XLR-RCA adapter (supplied)
- Sample-rate converter (SRC): Selectable at S/PDIF input; allowing input at any sample rate
- Bit transparency: Maintained (allows recording of Dolby or DTS streams)

Digital Outputs

- Formats supported: Lyra 2: S/PDIF (RCA or TOSLINK), ADAT, ADAT S/MUX (TOSLINK), AES3 (RCA)
- Sample rates: S/PDIF/AES3 44.1, 48, 88.2, 96, 176.4 and 192kHz
- Sample rates: ADAT (Lyra 2 only): ADAT (8 channel): 44k1, 48k; ADAT S/MUX (4 channel): 88k2, 96k
- Channel Status: Full implementation, Consumer (S/PDIF) or professional (AES3)
- Word-length: 24 bit, or reduction to 16 bits using flat TPDF dither or Prism Sound SNS (Super Noise Shaping - four alternative shapes available)
- AES3 (AES/EBU) operation (Lyra 2 only): via S/PDIF RCA, using RCA-XLR adaptor (supplied) and AES3 mode (2V p-p, 110Ω and AES3 channel status)
- Sample-rate converter (SRC) (Lyra 2 only): Selectable at S/PDIF output; output rate can be referenced to Wordclock, DI or local clock at 44.1, 48, 88.2, 96, 176.4 or 192kHz
- Bit transparency: Maintained in 24 bit mode (allows playback of Dolby or DTS streams to external decoder)

Sample-rate Converter (Src)

- THD+N <-137dB (0.000014%, -0.1dBFS)
- Dynamic range >138dB (0.000013%, -60dBFS)

Synchronization

- System sample rates 44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz

Sync sources:

- Master: local, Wordclock (Lyra 2 only), DI (S/PDIF input) or ADAT (Lyra 2 only)
- Local clock accuracy: ±50ppm
- Jitter rejection: >60dB / decade above 100Hz

Internal mixer delay (total analogue in to out):

- fs = 44.1kHz: 0.57ms
- fs = 48kHz: 0.52ms
- fs = 88.2kHz: 0.2ms
- fs = 96kHz: 0.18ms
- fs = 176.4kHz: 0.09ms
- fs = 192kHz: 0.08ms

Physical

- Form factor: 2/3 width, 1u 19inch rack mountable (Rack ears available as an option)

Dimensions:

- Table top (inc. feet): W: 285mm D: 242mm H: 50mm
- Rack-mount (inc. optional ears): W: 483mm D: 242mm H: 44.5mm

- Power: 90-250VAC, 50-60Hz internal power supply IEC 6A connector
- Power consumption: 15W
- Fuse rating: 0.5A(T), 20mm, glass
- Weight: 2.1kg
- Operation ambient conditions: 0 to 35°C, 85% maximum relative humidity

Supplied Accessories

- CD with software and manuals: x 1
- IEC mains lead: x 1
- USB Lead type A to B: x 1
- XLR-F to RCA-M adaptor (S/PDIF/AES3) (Lyra 2 only): x 1
- XLR-M to RCA-M adaptor (S/PDIF/AES3) (Lyra 2 only): x 1

Download Firmware Loading Guide for Prism Sound Lyra 2 USB Audio Interface Family

Download Operation Manual - A4 Format for Prism Sound Lyra 2 USB Audio Interface Family

Download Lyra Operation Manual - Letter format for Prism Sound Lyra 2 USB Audio Interface Family