Sennheiser Dante-Kit-MEG-14-40 Microphone Installations

The MAT 133-S with the Sennheiser Dante-Kit-MEG-14-40 Microphone Installations is as versatile as it is easy to operate. Experience clearly structured meetings and discussions as the intuitive handling will lead the focus on the content – not the technology. The proven Sennheiser KE 10 capsule provides the best speech intelligibility.
Powered by the SL DI 4 XLR with just a standard XLR 3 cable, the microphone is integrated in a bigger setup with a finger snap and makes even spontaneous discussion setups possible.

The SL DI 4 XLR four input Dante preamp is the ideal interface for wireless microphone receivers. As analog to digital audio converter, it allows for adding analog microphone systems to a Dante™ system. All Sennheiser XLR microphones and all wireless microphone receivers as well as all SpeechLine Wired installation microphones are compatible with the SL DI 4 XLR.

Features:

• Great speech-intellibility
• Phantom power via PoE
• Remote controllable gain level
• Daisy-chaining possible

To learn more about Sennheiser, Click Here

View more products from Sennheiser

• Impedance: < 100 Ω
• Dimensions: length: 450 mm (17,72")
• Transducer principle (Microphone): pre polarised condenser microphone
• Frequency response: 50 Hz 20 kHz
• Weight: 147 g (4,72 oz)
• Pick-up pattern: Cardioid
• Operating temperature: 0° ... + 40 °C
• Equivalent noise level: 26 dB (A)
• Equivalent noise level weighted as per CCIR 468-3: 37 dB
• Maximum sound pressure level (passiv): 130 dB SPL
• Power supply: P12 P48 V
• Current consumption: 3 mA

• Dimensions: 4.72 x 6.69 x 1.69 in (W x D x H)
• Connector: Mic in: XLR-3F
• Connector: Mic out: XLR-3M
• Connector: Logic: Clip contact for logic, Pin assignment: Trigger signal at logic connector: Logic in (external LED control), Ground, Logic out (switch signal)
• Weight: 2.67 lb
• Phantom powering: P 24 P 48
• Operating temperature: 14 ° to 122 ° F
• Current consumption: 3.7 mA
• Output voltage: Logic out: High level output voltage > 2.4 V, Low level output voltage < 0.4 V
• Output voltage: Logic in: High level input voltage > 2.0 V, Low level input voltage < 0.8 V
• Colour: LED light ring: Red / Green

• Power consumption: 500 mA
• Phantom powering: P 48
• Power supply: 12 V DC
• Powering: 12V DC or 802.3af PoE
• Communication: Dante Interface
• Connection: Audio In: 4x XLR3F Ethernet / Dante ™: 2x RJ 45 (1x with PoE) PowerLink: 2x 2pole connector

What's in the box:

• 1 SL DI 4 XLR
• 4 MAT 133-S
• 4 MEG 14-40