Triad-Orbit SM-WM1 Slide In Wall Mounting Pipe Plate
$39.99
The patent pending design of the SM1 System utilizes a novel slide in wall or ceiling mount. This allows the installer to set up the speaker and swivel assembly prior to hanging the speaker. The SM-WM1 also accepts the SM-PM1 pipe plate.
Please check with us about availability
Description
Triad-Orbit SM-WM1 Slide In Wall Mounting Pipe Plate
The patent pending design of the SM1 System utilizes a novel slide in wall or ceiling mount. This allows the installer to set up the speaker and swivel assembly prior to hanging the speaker. The SM-WM1 also accepts the SM-PM1 pipe plate.
The Triad-Orbit, Precision® AV Atmos Speaker Mount System offers many options for mounting onto walls, ceilings or Triad-Orbit® IO. This uniquely designed patent-pending speaker mounting system allows the installer to meet the critical demands of Dolby Atmos installations providing unparalleled flexibility in mounting and alignment options, saving time in installation and laser alignment. SM-1 system features multiple speaker mounting plates for different manufacturers, dual redundant locking mechanisms, and 15 degree locking positions in both tilt and pan axis. Optional mounting configurations are available to accommodate wall, ceiling, long drop ceiling, pipe and truss mounting.
System Components
- SM-WM1 wall/ceiling mount houses the SM-SW1 swivel. The SM-SW1 slides into the SM-WM1 mount and secures by 4 hex screws. This allows the speaker to be attached to the swivel first and then sliding the assembly in the SM-WM1 mounting plate.
- SM-SW1 swivel can accommodate the various speaker mounting plates or can connect directly to speakers that have a dual hole pattern (50mm-80mm). SW-1 has spring pins in 15 degree increments as well as secondary tension locks in both tilt and pan axis.
Speaker Brackets
- SM-705B and SM-708B (JBL 705p/708p speakers) have five possible mounting points to allow for optimal positioning. Refer to the provided instructions for mounting options.
Mounting Plates
- SM-7iP (non-powered JBL 705/708 installer series) speaker plate has four (4) 50mm holes and four (4) 80mm slots for ease of mounting. This allows both vertical and horizontal orientation when attaching to the SM-SW1 swivel.
- SM-GP (Genelec) speaker plate has four (4) holes spaced 127mm X 70mm to accommodate Genelec One series speakers and (4) holes spaced 108mm X 51mm for smaller Genelec speakers. Note: Many Genelec and other speakers may connect directly to the SM-SW1 using the 50mm-80mm slotted holes.
- SM-PM1 pipe mounting plate is intended for use with standard 3/4″ NTS pipe thread for long drop hanging or extending off of walls.
- SM-IOM1 is designed to be used with Triad-Orbit IO-connected components. Use with Triad-Orbit IO-GC grip clamp for truss mounting configurations.
- This list will be updated as new speaker manufacturer plates are approved for use. Contact Triad-Orbit if you do not see an intended use speaker on this list.
To learn more about Triad-Orbit, Click Here
Additional information
| Condition | New |
|---|---|
| Brand | Triad-Orbit |
Related products
Cloud Microphones CL-Z mic activator adds 12 to 24dB of gain to your signal, control over the input impedance (to get the best out of any microphone), while the premium circuitry passes your audio uncolored. It is particularly useful for low-output ribbon and dynamic mics in your studio, and it's perfect for driving long cable runs from the stage to the board in live sound settings.
Rear panel connectivity-gigabit ethernet HDMI and two USB 3.0 ports are mounted at the rear of the chassis for easy connectivity.
Master Tape 1/4″ x 1,250′ 7″ with Slotted Plastic Reel
Provides easy cable management simple installation with rugged steel design.
StudioPatch 9625 uses 96 Patch points to DB25, with programmable grounds. Comes with 1 - 1 foot black TT patch cord.
Recreated by acme audio, the new Motown d.i. WB-3 brings the exact character as the original di box.
You have not viewed any products yet.