Tube-Tech MEC-1A Recording Channel
$5,690.00
The MEC 1A is an all-tube mono recording channel, combining the classicTUBE-TECH designs: MP 1A mic preamp, EQ 1A active EQ and CL 2A compressor in one powerful, 2U recording package.
Please check with us about availability
Description
Tube-Tech MEC-1A Recording Channel
The MEC 1A is an all-tube mono recording channel, combining the classicTUBE-TECH designs: MP 1A mic preamp, EQ 1A active EQ and CL 2A compressor in one powerful, 2U recording package.
The MEC 1A delivers true TUBE-TECH sound: Full and warm, yet open and transparent.
MEC1A Technical Description
The TUBE-TECH MEC 1A Recording Channel is a one channel recording unit,
featuring a microphone preamplifier equalizer and compressor. At the heart of the shelving and bell filters you will find a tube operational amplifier.
The MEC 1A is all tube based except for the power supply. Input and Output have fully floating transformers. All DC voltages are stabilized, except the anode voltage for the output stage.
Additional information
| Weight | 16 lbs |
|---|---|
| Condition | New |
| Brand | Tube Tech |
Technical Spec
- Freq. response @-3 dB: 5 Hz - 60 kHz
- Low noise: < -85 dBU @ 10 dB gain
- CMRR: > 60 dB @ 10 kHz
- Output gain: Off to +10 dB
- Clickless swap relay (EQ <-> comp)
- Separate in/out switch per section
- Conductive plastic potentiometers
- Gold plated switches
- Fully regulated power supply with torodial transformer
- All-tube design (except PSU & sidechain circuit)
- In- and output are transformer balanced and fully floating
Microphone preamplifier:
- Gain: +20 to +70 dB (DI:10-60 dB)
- Input impedance: > 1.2 kΩ
- +48V phantom power, phase reverse, -20 dB pad, low cut
- DI input impedance > 1 MΩ
Equalizer:
- Active, tube based equalizer
- Three bands
- 6 low shelving frequencies
- 6 high shelving frequencies
- Bell-type Mid with 12 selectable frequencies & variable Q
Opto Compressor:
- Low distortion optical gain reduction element
- Ratio: 1.5:1 to 10:1
- Variable attack and release
- VU meter shows output or compression
- Linkable for stereo applications
Download User Manual for Tube-Tech MEC-1A Recording Channel
Download Specifications for Tube-Tech MEC-1A Recording Channel
Download Recall Sheet for Tube-Tech MEC-1A Recording Channel
Download Brochure for Tube-Tech MEC-1A Recording Channel
Related products
3 Band Class A Mic Pre EQ. Fully selectable with High Pass filter. DI, Output Fader, 48V Phantom
This is the high-pass filter version of the 1073MP. The 1073MPF is the mic pre-amp version of the 1073 equaliser, sharing the the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs and maintained focused mids.
Channel strip with microphone preamp and compressor/limiter.
This is the mic pre-amp version of the 1073 equaliser having the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs, and maintained focused mids.
3 Band Class A Mic Pre EQ. Expanded Frequencies. Fully selectable with High Pass filter. DI, Output Fader, 48V Phantom. Black Requires PSU
3 Band Class A Mic Pre EQ. 12K High with High Pass filter. DI, Output Fader, 48V Phantom. Blue. Requires PSU.
Channel Strip Mono Class-A Microphone PreAmp with 4-Band Fully Parametric Equalizer with PSU
The BAE 1073 is as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.
You have not viewed any products yet.